GE GUD27GSSMWW - Tub Cover; Suspension Rods

– 43 –
NOTE: The tub cover can be replaced without
removing the tub.
Tub Cover Removal
1. Remove the top cover assembly. (See Top
Cover Assembly in this section.)
2. Unsnap the eight tabs that latch onto the rim
of the outer tub.
3. Lift and remove the tub cover.
Tub
Cover
Tab (1 of 8)
Suspension
Rod
Slot
Tub Suspension Rods Removal
1. Remove the top cover assembly. (See Top
Cover Assembly in this section of the service
guide.)
2. Lift up on the tub and pull the suspension rod
out of the slot in the tub.
Tub Cover Suspension Rods