GE HTW200ASKWW User Manual

13
11/16/2015
Control Panel Assembly Removal
Roll the control panel
forward to lay on its face
and remove four 1/4 in.
hex screws securing the
rear panel to the control
panel assembly and
remove.
Disconnect harness from
the control board.
IMPORTANT: When reinstalling the control panel assembly, ensure that all ground wires are
reconnected and tested for proper continuity to the ground terminal on the power cord.
RJ45
Connection

GE HTW200ASKWW Specifications

General

Brand	GE
Model	HTW200ASKWW
Category	Washer
Language	English