GE IC3645SH7R354D2 - Memory Map

RS-232 MEMORY MAP TABLES
SX TRANSISTOR CONTROL Page 37
April 2002
Section 6.0 MEMORY MAP
E
2
Func No. HS
No.
Traction Control
Function
Access By Restrictions
0 1 1 MPH Scaling HS or PC None
1 2 2 Creep Speed HS or PC None
2 3 3 Armature Acceleration Rate Forward HS or PC None
3 4 4 Max Armature Current Limit HS or PC None
4 5 5 Response Time of Battery State of Charge Updates HS or PC None
5 6 6 Armature Acceleration Rate Reverse HS or PC None
6 7 7 Min Field Current HS or PC None
7 8 8 Max Field Current HS or PC None
8 9 9 Regen Armature Current Limit HS or PC None
9 10 10 Field Current for Regen and Plug Braking HS or PC None
10 11 11 Turf Speed Limit HS or PC None
11 12 12 Reverse Speed Limit HS or PC None
12 13 13 Percent Charge Switch Plug to Regen HS or PC None
13 14 14 IR Compensation HS or PC None
14 15 15 Battery Volts Select HS or PC None
15 16 16 Battery Voltage Trip Point for Mtr Current Reduction HS or PC None
16 17 17 Card Type Selection HS or PC None
17 18 18 Line Contactor Drop Out Time Delay HS or PC None
18 19 19 Field Current Ramp Rate During Regen HS or PC None
19 20 20 MPH Overspeed Limit HS or PC None
20 21 21 Rate Field Changes in Overspeed HS or PC None
21 22 22 Pulse Counts HS or PC For DD on power up
22 23 23 Error Compensation HS or PC None
23 24 24 Field Weakening Start HS or PC None
24 25 25 Monitor HS or PC GE Temporary Storage
25 26 26 Ratio of Field to Armature Amps HS or PC None
26 27 27 Hour Meter Minutes HS or PC None
27 28 28 Fault Count Pointer HS or PC None
28 29 29 Hour Meter Tens and Units HS or PC None
29 30 30 Hour Meter Thousands and Hundreds HS or PC None
30 31 Aux HM (Tens/Ones) PC Only None
31 32 Aux HM (Thou/Hun) PC Only None
32 33
(18)
Stored Status Code #1 PC Only Reset to Zero Only
33 34 BDI 1 PC Only Reset to Zero Only
34 35 Hours (Tens/Ones) 1 PC Only Reset to Zero Only
35 36 Hours (Thou/Hun) 1 PC Only Reset to Zero Only
36 37
(20)
Stored Status Code #2 PC Only Reset to Zero Only
37 38 BDI 2 PC Only Reset to Zero Only
38 39 Hours (Tens/Ones) 2 PC Only Reset to Zero Only
39 40 Hours (Thou/Hun) 2 PC Only Reset to Zero Only
40 41
(22)
Stored Status Code #3 PC Only Reset to Zero Only
41 42 BDI 3 PC Only Reset to Zero Only
42 43 Hours (Tens/Ones) 3 PC Only Reset to Zero Only
43 44 Hours (Thou/Hun) 2 PC Only Reset to Zero Only
44 45
(22)
Stored Status Code #4 PC Only Reset to Zero Only