GE IS200ADIIH A Series User Manual

g
GE Industrial Systems
Auxiliary Drive to ISBus Interface Board
IS200ADIIH_A_ _
Safety Symbol Legend
Indicates a procedure or
condition that, if not strictly
observed, could result in
personal injury or death.
These instructions do not purport to cover all details or variations in equipment, nor to
provide every possible contingency to be met during installation, operation, and
maintenance. If further information is desired or if particular problems arise that are not
covered sufficiently for the purchaser’s purpose, the matter should be referred to GE
Industrial Systems.
This document contains proprietary information of General Electric Company, USA, and is
furnished to its customer solely to assist that customer in the installation, testing,
operation, and/or maintenance of the equipment described. This document shall not be
reproduced in whole or in part, nor shall its contents be disclosed to any third party
without the written approval of GE Industrial Systems.
Indicates a procedure or
condition that, if not strictly
observed, could result in damage
to or destruction of equipment.
Note Indicates an essential or
important procedure or
statement.
Section Page
Functional Description............................................................................................ 2
ISBus ............................................................................................................... 3
Connections ................................................................................................ 3
Performance ................................................................................................ 4
Data Mapping.............................................................................................. 5
Drive Parameters ............................................................................................. 7
LAN Validation .......................................................................................... 7
LAN Faults ................................................................................................. 8
Application Data..................................................................................................... 9
LED Indicators............................................................................................... 11
Testpoints....................................................................................................... 12
Connectors..................................................................................................... 12
Installation and Renewal/Warranty Replacement................................................. 14
How to Order a Board.................................................................................... 14
Board Identification .................................................................................. 14
Warranty Terms ........................................................................................ 15
Placing the Order ...................................................................................... 15
Handling Precautions..................................................................................... 15
New Installations ........................................................................................... 16
ADII Required Parts ................................................................................. 16
Installation Procedures.............................................................................. 17
Replacement Procedures................................................................................ 18
Innovation Series is a trademark of General Electric Company, USA
GEI-100305

GE IS200ADIIH A Series Specifications

General

Brand	GE
Model	IS200ADIIH A Series
Category	Computer Hardware
Language	English

Summary

Safety Symbol Legend

Functional Description

ISBus

Details the ISBus network protocol, frame rates, and delay times.

Connections

Describes the RJ45 connectors (P2, P3) used for ISBus communication.

Performance

Data Mapping

Drive Parameters

ADII Jumper 1 (ADIIJP1)

Configuration settings for ADII jumpers, including enabling the interface and watchdog.

ADII Node Number (ADINID)

Defines the drive's ISBus node ID for network identification.

LAN Validation

Details LAN watchdog and heartbeat functions for network validation.

LAN Faults

Application Data

LED Indicators

Testpoints

Connectors

Installation and Renewal/Warranty Replacement

How to Order a Board

Provides information on identifying, ordering, and obtaining replacement boards.

Board Identification

Explains how to identify a board using its alphanumeric part number and conventions.

Warranty Terms

Details product warranty information, period, and service coverage.

Placing the Order

Instructions for ordering replacement parts, including contact information and required details.

Handling Precautions

Guidelines for preventing component damage from static electricity and safe handling practices.

New Installations

ADII Required Parts

Lists the essential parts required for installing the ADII board in a drive.

Installation Procedures

Replacement Procedures

To install the new (replacement) board on the board carrier

Steps for installing a replacement ADII board onto the drive's board carrier.

Notes