Why is "LOCK DOOR" flashing in the display of my GE JB620 Ranges?
The "LOCK DOOR" message flashes on your GE Ranges display because the self-clean cycle has been selected, but the oven door is not fully closed. Make sure to close the oven door and latch it to start the cleaning cycle.
Why is my GE JB620 Ranges food not broiling properly?
If food isn't broiling properly in your GE Ranges, ensure the oven controls are set correctly for broiling mode. Check the Cooking Guide for proper rack positioning. Make sure the food is not being cooked in a hot pan and that you are using cookware specifically designed for broiling. If using aluminum foil, make sure it's properly fitted and slit as recommended. If your area has low voltage, preheat the broil element for 10 minutes.
How to stop my GE JB620 Ranges from smoking during self-clean?
If you experience excessive smoking during clean cycle with your GE Ranges, press the Cancel/Off pad, open the windows to rid the room of smoke, wait until the LOCKED light goes off, wipe up the excess soil, and reset the clean cycle.
Why is my GE JB620 food not baking properly?
If your food isn't baking properly in your GE Ranges, several factors could be the cause. First, ensure that the oven controls are set correctly, referring to the Cooking Modes section. Next, check that the rack position is correct and level, consulting the Cooking Modes section and Cooking Guide. Also, verify that you are using the correct cookware of the proper size, as detailed in the Cookware section. The oven temperature might need adjustment; see the Special Features section. Finally, remember that ingredient substitutions can alter the recipe outcome.
Why is there steam from the vent of my GE JB620 Ranges?
It is normal to see steam coming out of the oven vents of your GE Ranges when using the ovens. As the number of racks or amount of food being cooked increases, the amount of visible steam will increase. This is normal.
Why does my GE JB620 oven door glass look tinted?
If your GE Ranges oven door glass appears to be "tinted" or have a "rainbow" color, this is normal! Under certain light or angles you may see this tint or rainbow color.
What to do if my GE JB620 oven will not steam clean?
If your GE Ranges oven will not steam clean, and the display flashes HOT, allow the oven to cool to room temperature and reset the controls. Also, ensure the oven controls are properly set. See the Using Steam Clean section. Make sure you close the door to start steam clean cycle.
What to do if my GE Ranges oven will not self-clean?
If your GE Ranges oven will not self-clean, it could be because the temperature is too high to start a self-clean operation. Allow the oven to cool down and then reset the controls. Also, ensure that the oven controls are properly set by referring to the Cleaning the Oven section.
What to do if my GE Ranges oven door will not open after a clean cycle?
If your GE Ranges oven door won't open after a clean cycle, it's likely because the oven is still too hot. Allow the oven to cool below the locking temperature, and then try opening the door again.
Why is the display flashing on my GE JB620 Ranges?
If the display on your GE Ranges flashes, reset the clock.
General| Number of Burners | 4 |
|---|---|
| Self-Cleaning | Yes |
| Color | Black |
| Fuel Type | Electric |
| Burner Type | Radiant |
| Cooktop Material | Ceramic Glass |
| Type | Freestanding |
| Cooktop Surface | Smooth |
| Ignition Type | Electric |
To Next Page
