Usingthe surface units. Re.co,,
Throughout this manual, features and appearance may vary from your model.
OFF
6
Be sure you turn the control knob
to OFFwhen you finish cooking,
How to Set
Push the knob in and turn in either
direction to the setting you want.
At both OFFand Hi tile control clicks
into position. You may hear slight clicking
sounds during cooldng, indicating the
control is keeping tile power ]e\ el you set.
indicator Lights(onrad/antglassmodelsonly)
A HOT SURFACEor HOT COOKTOP
(depending on model) indicator light will
glow when ally radiant element is turned
on and will remain on until tile surtime is
COOlenough to touch.
A SURFACEUNtron or BURNER ON
(depending on model) indicator light will
glow when ally sulihce unit is on.
NOTE"TheSURFACEUNtr on/bd/2atorI/_?htmay
glow between the surfacecontrol sett/bgsof LO
andOFF,but there/2 no power to the surface units.
=.
_4
€
=.
=.
€
{1
i
w
m
€
€
i
€
€
To Next Page
Loading...
