GE JCBP63 Owner's Manual And Installation Instructions

A Hot indicator light will glow when any radiant
element is turned on, and will remain on until
the surface is cool enough to touch.
A Burner On indicator light will glow when any
surface unit is on.
NOTE: The Hot indicator light may glow between the
surface control settings of Min and OFF, but there is no
power to the surface units.
7
Using the surface units. GEAppliances.ca
Throughout this manual, features and appearance may vary from your model.
How to Set
Push the knob in and turn in either
direction to the setting you want.
At both OFF and Max the control clicks
into position. You may hear slight clicking
sounds during cooking, indicating the
control is keeping the power level you set.
Min
Max
Operating
Instructions
Care and Cleaning
Installation
Instructions
Troubleshooting Tips
Safety Instructions
Consumer Support
Be sure you turn the control knob
to OFF when you finish cooking.
Min
Max
Min
Max
Burner
On
Surface
de cuisson
Hot
Chaud
Indicator Lights (on radiant glass models only)

GE JCBP63 Specifications

General

Brand	GE
Model	JCBP63
Category	Ranges
Language	English