EasyManuals Logo

GE JCP930 Owner's Guide

GE JCP930
28 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #8 background imageLoading...
Page #8 background image
8
Care and cleaning of the cooktop.
Be sure electrical power is off and all surfaces are cool before cleaning any part of the cooktop.
Control Knobs
The control knobs may be removed for easier
cleaning.
Before removing the knobs for
cleaning, please note that the knobs
are in the
OFF
position. When replacing
the knobs, check the
OFF
position to
insure proper placement.
Wash knobs in soap and water but do not
soak. Avoid getting water down into the
knob stem holes.
The stem has a groove in each side. The
groove on one side has a spring clip. The
other groove is clear. Check the inside of
the knob and find the molded rib.
Replace the knob by fitting the molded
rib inside the knob into the clear groove
on the stem.
Clear groove
Spring
clip
Molded rib
How to Remove Packaging Tape
To assure no damage is done to the finish
of the product, the safest way to remove
the adhesive left from packaging tape and
labels on new appliances is an application
of a household liquid dishwashing
detergent, mineral oil or cooking oil.
Apply with a soft cloth and allow to soak.
Wipe dry and then apply an appliance
polish to thoroughly clean and protect
the surface.
NOTE: The adhesive must be removed from
all parts. It cannot be removed if it is baked on.
Stem
Safety InstructionsOperating InstructionsCare and CleaningTroubleshooting TipsConsumer Support

Other manuals for GE JCP930

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the GE JCP930 and is the answer not in the manual?

GE JCP930 Specifications

General IconGeneral
BrandGE
ModelJCP930
CategoryCooktop
LanguageEnglish

Related product manuals