L
Latasha WilsonAug 29, 2025
Why do the clock and timer not work on my GE JGBS30?
- MMary TaylorAug 29, 2025
If the clock and timer on your GE Ranges do not work, replace the fuse or reset the circuit breaker.
To Next PageTo Next PageWhy do the clock and timer not work on my GE JGBS30?
If the clock and timer on your GE Ranges do not work, replace the fuse or reset the circuit breaker.
What to do if food does not bake properly in my GE JGBS30 Ranges oven?
If food isn't baking properly in your GE Ranges oven, make sure the oven controls are set correctly. Check that the rack position is correct and level. Ensure you are using the correct cookware of the proper size. The oven temperature may also need adjustment.
What to do if my GE JGBS30 has excessive smoking during broiling?
If you experience excessive smoking while broiling in your GE Ranges, lower the rack position of the food.
Why are my GE JGBS30 burner flames very large or yellow?
Very large or yellow burner flames on your GE Ranges indicate an improper air to gas ratio. If your range is connected to propane gas, contact the technician who installed it or made the conversion.
Why is there excessive smoking during broiling in my GE JGBS30 oven?
Excessive smoking during broiling in your GE Ranges oven means the food is too close to the burner element. Lower the rack position of the food.
Why doesn't my new GE JGBS30 Ranges cook like my old one?
If your new GE Ranges doesn't cook like your old one, remember it has a different cooking system, so it may cook differently. For the first few uses, follow your recipe times and temperatures carefully and use rack positions recommended in the Cooking Guide. If you still think your new oven is too hot or too cold, you can adjust the temperature yourself to meet your specific cooking preference.
Why does my GE JGBS30 Ranges oven light not work?
If the oven light does not work, the light bulb is loose or defective. Tighten or replace the bulb.
What to do if food does not broil properly in my GE JGBS30 oven?
If food isn't broiling properly in your GE Ranges oven, ensure you've selected the appropriate broil mode and are using the correct rack position. If using aluminum foil on the broil pan, wrap it tightly and add slits to allow grease to drain.
What to do if my GE JGBS30 oven will not self-clean?
If your GE Ranges oven will not self-clean, it could be due to a couple of reasons. The temperature may be too high, so allow the oven to cool and reset the controls. Also, the oven controls may be improperly set.
What to do if my GE Ranges oven appears not to work?
If your GE Ranges oven appears not to work, there are a couple of things you can check. First, a fuse in your home may be blown, or the circuit breaker tripped, so replace the fuse or reset the circuit breaker. Also, make sure the oven controls are properly set. If this does not solve the issue, verify that the oven is not in Sabbath Mode.
Instructions for securing the range to prevent tipping hazards.
Procedures for lighting and using surface burners.
Instructions for removing and replacing the oven door.
General
