Why do my GE JGBS30 clock and timer do not work?
If the clock and timer on your GE Ranges aren't working, check if a fuse in your home has blown or if the circuit breaker has tripped. Replace the fuse or reset the circuit breaker.
What to do if my GE JGBS30 has excessive smoking during broiling?
If you experience excessive smoking while broiling in your GE Ranges, lower the rack position of the food.
How to fix GE JGBS30 Ranges burners that do not light?
If your GE Ranges burners do not light, ensure the electrical plug is properly inserted into a grounded outlet. Also, check if a fuse in your home may be blown or the circuit breaker tripped, and replace the fuse or reset the circuit breaker. Additionally, make sure the gas supply is connected and turned on. Ensure burner parts are correctly replaced, and remove the burners and clean them if the burner slots near the electrode or the round lighter port on the oval burner are clogged. Lightly polish flat tip of electrode with nail file or sandpaper until shiny if there is food residue on electrode.
Why do the clock and timer not work on my GE JGBS30?
If the clock and timer on your GE Ranges do not work, replace the fuse or reset the circuit breaker.
Why do the surface burners light but bake and broil burners do not on my GE JGBS30 Ranges?
If the surface burners light but the bake and broil burners do not on your GE Ranges, the gas to the oven burners may have been shut off. The oven gas shut-off is located on the gas regulator near the gas line attachment to your range. Locate it and flip the lever.
Why is there excessive smoking during the clean cycle on my GE JGBS30?
Excessive smoking during the clean cycle is often due to excessive soil or grease in the oven. To resolve this, turn the Oven Temperature Knob to OFF and wait until the oven cools. Open the windows to rid the room of smoke, then wipe up the excess soil and reset the clean cycle.
Why is there excessive smoking during broiling with my GE JGBS30?
Excessive smoking during broiling typically occurs when food is too close to the burner element. To reduce smoking, lower the rack position of the food.
What to do if food does not bake properly in my GE JGBS30?
If food isn't baking properly in your GE Ranges, it could be due to several reasons. The oven controls might be improperly set. The rack position may be incorrect or not level. You might be using incorrect cookware or cookware of an improper size. The oven temperature may need adjustment.
What to do if my GE JGBS30 Ranges has excessive smoking during the clean cycle?
If you experience excessive smoking during the clean cycle of your GE Ranges, press the Cancel/Off pad. Open the windows to ventilate the room. After the LOCKED light turns off, wipe up any excess soil and then reset the clean cycle.
Why does my GE Ranges oven take longer to preheat?
Cookware, food, and racks in the oven will cause differences in preheat times. Remove excess items to reduce preheat time.
Instructions for securing the range to prevent tipping hazards.
Procedures for lighting and using surface burners.
Instructions for removing and replacing the oven door.
To Next Page
General
