Installation Instructions
INSTALLING THE COOKTOP
[] ATTACHING A BLOWER
TRANSITION DUCT
Use a blower transition duct for all downward
duct installations to connect to 6" round
standard ductwork. This 31/4" x 10" rectangle
to 6" round transition duct is available at
your local building supply store.
/ CreoV_he r
side)
Install the transition duct to the blower outlet.
Secure all joints with duct tape to assure an
airtight seal.
CONNECTING THE DUCTWORK
Connect the ductwork prepared in Steps 5 and
6 to the blower transition duct.
27
To Next Page
Loading...
