—
--
Thel’irneCook featureahws you
— toplwsd the cookingti
Power Level 10is automatically set
or time cooking, but you may
change this for more flexibility.
Seeyour Cookbook.
When the oven completes Time
Cooking, it automatically shuts off.
It willthen display “End” and beep
once a minute iniil you either ope-n
the door or touch the CLEAR/
OFF pad.
To become better acquainted with
Time Cook function, make a cup of
coffee by using the following steps.
— Step1:Fillacup2/3fullof
.
..—
,
—,
add 1teaspoonofinstant
-?==
coffeeandstirto-dissolve.Usea
cupthathasnometaldecoration
andismicrowavesafe.Placecup
inovenandclosedoor.
Step 2: Touch TIME COOK. The
display shows :0, ENTER COOK
TIME flashes. Power Level 10is
automatically set, but does not
appear on display.
Step 3: Select your time. Touch 1,
2, and Ofor a minute and 20 sec-
onds. TIME COOK and 1:20are
displayed.
If another Power Level is desired,
touch POWER LEVEL and the
number although Power Level 10
(HIGH) is preferred for this cup
of coffee.
Step 4: Touch START. Time
counting down shows on display.
Step 5: When time is up, the oven
sounds, oven light and fan shut off.
The display will show “End”.
Step 6: Open the door or touch
CLEAR/OFF pad.
How to use Au’1’o START
The AUTO
STfeallows
you to programyourovenlo begin
cooking at a presettimeof day-
up toIa 12hour delay.
TO U$e AUTO START
Step 1: Enter your desired cooking
program.
Step 2: Touch AUTO START pad
(instead of START pad).
Step 3: Enter the time you want the
oven to start. (Be sure your micro-
wave oven clock shows the correct
time of day).
Step 4: Touch START pad.
The oven will automatically start at
the desired time.
Qa.mkms andAnswers
Q.I set my oven for the time called
for in the recipe but at the end of
the time allowed, my dish wasn’t
done. What happened?
A. Since house power varies due to
time or location, many Time Cook
recipes giveyou a time range to
prevent overcooking. Set the oven
for minimum time, test the food for
doneness, and cook your dish a
little longer, if necessary.
Q. I want to cook on a Power
Level other than HIGH, what do I
need to do?
A. To change the Power Level,
touch the POWER LEVEL pad
after entering desired cooking time.
Enter the desired number and then
touch START.
Q. Can I interrupt my Time Cook
function to check the food?
A. Yes.To resume cooking, simply
close the door and touch START.
NOTE: Microwave power will not
come on until you are ready. You
must touch START for cooking to
begin.
Q. I touched the number pads and
selected my power level. When I
toucbed START, however,my oven
didn’tcome on. Why not?
A. The TIME COOK pad must be
touched before setting the number
pads or else your oven will not
begin cooking.
Q. I tried to change Power Level
but the display changed back to
cooking time. Why?
A. After touching Power Level pad
you only have 4 seconds to enter the
number. Try setting controls again.
~
——
—.
—
—
—
—
—.
~.
——
—
—–
—
—
—
—.
—
—
-. .-
E =
...
- .
.
——.
14Kia-:-
—
—
—
—.
—
—.
—
—
To Next Page
Loading...
Need help?
General
