Why is there a “Burning” or “oily” odor emitting from the vent of my GE JKS5000DNBB?
A "burning" or "oily" odor emitting from the vent of your GE oven is normal in a new oven and will disappear over time. To speed up the process, set a self-clean cycle for a minimum of 3 hours, consulting the Cleaning the Oven section.
Why is there excessive smoking during broiling in my GE Oven?
If you notice excessive smoking while broiling in your GE oven, it might be because the food is too close to the burner element. To resolve this, simply lower the rack position of the food.
Why is there excessive smoking during the clean cycle of my GE oven?
If you experience excessive smoking during the clean cycle of your GE oven, it's likely due to excessive soil or grease. To resolve this, press the Cancel/Off pad, open the windows to ventilate the room, wait until the smoke clears, wipe up the excess soil, and then reset the clean cycle.
What to do if my GE JKS5000DNBB Oven door will not open after a clean cycle?
If your GE oven door won't open after a clean cycle, it's likely because the oven is still too hot. Allow the oven to cool down below the locking temperature, and then you should be able to open the door.
What to do if my GE JKS5000DNBB Oven is not clean after a clean cycle?
If your GE oven is not clean after running a clean cycle, it could be due to improperly set oven controls. Alternatively, the oven may have been heavily soiled before starting the cleaning cycle. To address this, clean up any heavy spillovers before initiating the clean cycle. For heavily soiled ovens, consider running the self-clean cycle again or for a longer duration.
Why will my GE JKS5000DNBB Oven not work remotely?
If your GE oven will not work remotely, it could be due to router issues, lack of a wireless signal, or other connectivity problems. For assistance with oven wireless network connectivity, please call 800.220.6899. Also, the oven may not be connected, no answer.
What to do if there is a power outage and the clock flashes on my GE JKS5000DNBB?
If you've experienced a power outage and the clock on your GE oven is flashing, reset the clock. If the oven was in use during the outage, you must reset it by pressing the Cancel/Off pad, setting the clock, and resetting any cooking function.
Why is my GE JKS5000DNBB Oven making fan noise?
If you hear fan noise from your GE oven, a cooling fan may have automatically turned on. This is normal, as the cooling fan will turn on to cool internal parts. It may run for up to 1-1/2 hours after the oven is turned off.
How to fix GE JKS5000DNBB Oven light that does not work?
If your GE oven light is not working, the light bulb may be loose or defective. Try tightening or replacing the bulb. If that doesn't work, the pad operating the light might be broken, in which case, no answer.
What does it mean if “F— and a number or letter” flash in the display of my GE oven?
If your GE oven displays an error code that looks like “F— and a number or letter,” it indicates a function error. First, press the Cancel/Off pad and let the oven cool down for one hour. Then, try using the oven again. If the error code reappears, disconnect all power to the oven for at least 30 seconds before reconnecting it. If the function error persists after that, no answer.
General| Brand | GE |
|---|---|
| Model | JKS5000DNBB |
| Fuel Type | Electric |
| Oven Capacity | 5.0 cu. ft. |
| Self-Cleaning | Yes |
| Convection | Yes |
| Broil Element | Yes |
| Bake Element | Yes |
| Warranty | 1 Year Limited |
| Cooktop Surface | Ceramic Glass |
| Color | Black |
| Number of Oven Racks | 2 |
| Power Source | Electric |
| Type | Range |
| Width | 30 in |
To Next Page
