Why is the display flashing on my GE JS645FLDS?
- JJoseph NortonSep 2, 2025
If the display on your GE Ranges flashes, it typically indicates a power failure. Reset the clock to resolve the issue.
Why is the display flashing on my GE JS645FLDS?
If the display on your GE Ranges flashes, it typically indicates a power failure. Reset the clock to resolve the issue.
What to do if my GE JS645FLDS oven does not work?
If your GE Ranges oven isn't working or appears not to be working, check if a fuse in your home has blown or if the circuit breaker has tripped and replace the fuse or reset the circuit breaker. Also, ensure the oven controls are properly set by referring to the Using the Oven section. Finally, verify that the oven is not in Sabbath Mode by checking the Special Features section.
Why is my GE JS645FLDS smoking during self-clean?
If you encounter excessive smoking during a clean cycle on your GE Ranges, it's likely due to excessive soil or grease in the oven. Press the Cancel/Off pad, open the windows to ventilate the room, wait for the LOCKED light to turn off, and then wipe up the excess soil before resetting the clean cycle.
Why is my GE JS645FLDS Ranges smoking when broiling?
If you notice excessive smoking during broiling with your GE Ranges, it's likely because the food is too close to the burner element. Lower the rack position of the food to increase the distance from the heat source.
How to improve cooking speed on GE Ranges surface units?
If your GE Range surface units aren't maintaining a rolling boil or cooking isn't fast enough, ensure you're using flat pans that match the diameter of the surface unit. Also, covering the pan with a lid can help retain heat, especially if the power voltage in your area is low.
How to remove scratches from GE JS645FLDS glass cooktop?
If you see scratches (that may look like cracks) on your GE Ranges cooktop glass surface, know that these scratches are not removable. However, tiny scratches will become less visible over time with regular cleaning. To prevent scratches, use recommended cleaning methods and ensure cookware bottoms are clean and smooth before use. Avoid sliding cookware across the cooktop surface.
Why is my GE Ranges oven not clean after self-cleaning?
If your GE Ranges oven isn't clean after running a clean cycle, it might be due to improperly set oven controls. Please refer to the Cleaning the Oven section for guidance. Also, heavily soiled ovens may require a second cleaning cycle or a longer cleaning time. It's best to clean up any significant spillovers before starting the self-clean cycle.
What to do if food does not broil properly in my GE JS645FLDS oven?
If food isn't broiling properly in your GE Ranges oven, ensure you've selected the appropriate broil mode and are using the correct rack position as suggested in the Cooking Guide. Also, make sure your cookware is cool and specifically designed for broiling. If using aluminum foil, ensure it's properly fitted and slit as recommended. In areas with low voltage, preheat the broil element for 10 minutes.
Why is the clock flashing on my GE JS645FLDS Ranges after a power outage?
If you experience a power outage and the clock on your GE Ranges flashes, it indicates a power outage or surge. Reset the clock. If the oven was in use, you must reset it by pressing the Cancel/Off pad, setting the clock, and resetting any cooking function.
Why does the display go blank on my GE JS645FLDS Ranges?
If the display on your GE Ranges goes blank, check if a fuse in your home has blown or if the circuit breaker has tripped, and replace the fuse or reset the circuit breaker. Also, see the Special features section to check if the clock is turned off.
Fuel Type | Electric |
---|---|
Number of Burners | 5 |
Oven Capacity | 5.3 cu. ft. |
Self-Cleaning | Yes |
Color | Stainless Steel |
Type | Slide-In |
Wi-Fi Connectivity | No |
Cooktop Surface | Glass |
Width | 30 inches |
Ensures the range is secured to prevent tipping hazards and associated risks.
Provides essential guidelines for safe operation, installation, and maintenance.
Precautions for flammable items, fire prevention, and spread control during use.
Guidelines for safe operation of the range's cooking surface and heating elements.
Specific safety measures for radiant glass cooktops and general oven operation.
Safety precautions and instructions for using the self-cleaning oven feature.
Instructions for safely removing protective shipping film and packaging tape.
How to set and use surface elements, including dual units and control knobs.
Instructions for using the warming zone to keep food at serving temperature.
Advice for canning, cooktop maintenance, and temperature limiter function.
Guidance on suitable cookware, what to avoid, and usage tips for glass cooktops.
Descriptions of various oven control pads and their functions for operation.
Features for adjusting temperature, sound, clock display, and auto shutoff.
Instructions for setting, using, and exiting Sabbath mode, including power outage notes.
Guidance on rack placement, foil use, and cookware performance.
Explanation of traditional bake, broil (Hi/Lo), and warm modes for cooking.
Instructions for cleaning control knobs, panel, oven exterior, and surfaces.
Guidance for manual cleaning, self-clean mode, racks, and heating elements.
Daily cleaning, removing burned-on residue, and heavy residue removal.
Removing marks, cleaning seals, and handling sugary spills/melted plastic.
Step-by-step instructions for replacing the oven light bulb.
Instructions for removing/replacing the oven door and storage drawer.
Details on warranty coverage, exclusions, and information on purchasing extended warranties.
List of optional accessories, replacement parts, and cleaning products.
Contact information and resources for product support, registration, and service.