Why does my GE JS660EL1ES oven sometimes take longer to preheat?
If your GE Ranges oven sometimes takes longer to preheat, it could be due to cookware or food in the oven; remove these items to reduce preheat time. Also, the number of racks in the oven can affect preheating time; remove some racks if necessary.
Why my GE Ranges oven does not work?
If your GE Ranges oven isn't working, there could be a few reasons. First, check your home's fuse box or circuit breaker to see if a fuse has blown or a breaker has tripped; replace the fuse or reset the breaker. Also, make sure the oven controls are properly set. Finally, check to see if the oven is accidentally in Sabbath Mode, and if so, disable it.
How to get the display to show “oFFSEt” on my GE Ranges?
The Broil Hi/Lo and Bake pads must be touched at the same time and held for 3 seconds.
Why is the DOOR LOCK light on when I want to cook on my GE Ranges?
The DOOR LOCK light is on because the oven door is locked, as the temperature inside the GE Ranges oven has not dropped below the locking temperature. Press the Cancel/Off pad and allow the oven to cool.
Why GE JS660EL1ES oven will not self-clean?
If your GE Ranges oven won't self-clean, it could be due to a few reasons. If the oven temperature is too high, allow it to cool down before resetting the controls. Also, make sure the oven controls are properly set. Ensure the oven door is completely closed.
What does it mean when "LOCK DOOR" flashes in the display of my GE Ranges?
The "LOCK DOOR" flashing in the display of your GE Ranges indicates that the self-clean cycle has been selected, but the oven door is not closed. Close the oven door and latch it if your unit has a manual latch.
What to do if food does not bake properly in GE JS660EL1ES?
If food isn't baking properly in your GE Ranges, several factors could be the cause. Make sure the oven controls are set correctly. Check that the rack position is correct and the rack is level. Ensure you're using the correct cookware of the proper size. It may be necessary to adjust the oven temperature; see the Special Features section. Lastly, consider that ingredient substitutions can affect the outcome.
What does it mean when “F— and a number or letter” flash in the display of GE Ranges?
If "F— and a number or letter" flash in the display of your GE Ranges, it indicates a function error code. Press the Cancel/Off pad and allow the oven to cool for one hour, then try putting the oven back into operation. If the code repeats, disconnect all power to the oven for at least 60 seconds and then reconnect power. If the error persists, call for service.
Why does the display go blank on my GE JS660EL1ES?
If the display on your GE Ranges goes blank, check if a fuse in your home has blown or if the circuit breaker has tripped, and replace the fuse or reset the circuit breaker. Also, see the Special features section to check if the clock is turned off.
What to do if surface units do not work properly on my GE Ranges?
If the surface units on your GE Ranges aren't heating up properly, it could be due to a blown fuse or tripped circuit breaker in your home. Try replacing the fuse or resetting the circuit breaker. Also, make sure the cooktop controls are correctly set for the surface unit you're using.
General| Brand | GE |
|---|---|
| Model Number | JS660EL1ES |
| Product Type | Range |
| Fuel Type | Electric |
| Number of Burners | 5 |
| Oven Capacity | 5.3 cu. ft. |
| Convection | Yes |
| Self-Cleaning | Yes |
| Color/Finish | Slate |
| Voltage | 240V |
| Wi-Fi Connect | Yes |
| Width | 30 in |
To Next Page
