Why does my GE JS660EL1ES surface unit stop glowing when turned to a lower setting?
If the surface unit on your GE Ranges stops glowing when turned to a lower setting, the unit is still on and hot. This is normal.
Why does the display on my GE JS660EL1ES go blank?
If the display on your GE Ranges goes blank, first check your home's fuse box or circuit breaker to see if a fuse has blown or a breaker has tripped; replace the fuse or reset the breaker. Also, check the Special features section to ensure the clock is turned on.
How to fix GE JS660EL1ES oven light that does not work?
If the oven light in your GE Ranges isn't working, first check if the bulb is loose or defective; tighten or replace it. If the pad operating the light is broken, you will need to call for service. Also, verify that the oven is not in Sabbath mode.
What to do if food does not bake properly in GE JS660EL1ES?
If food isn't baking properly in your GE Ranges, several factors could be the cause. Make sure the oven controls are set correctly. Check that the rack position is correct and the rack is level. Ensure you're using the correct cookware of the proper size. It may be necessary to adjust the oven temperature; see the Special Features section. Lastly, consider that ingredient substitutions can affect the outcome.
What to do if food does not broil properly in GE JS660EL1ES Ranges?
If food isn't broiling properly in your GE Ranges, ensure you've selected the appropriate broil mode. Check the Cooking Guide for proper rack position suggestions. Make sure the cookware is cool before use and is specifically designed for broiling. If using aluminum foil, conform to pan slits. In areas with low voltage, preheat the broil element for 10 minutes.
How to stop excessive smoking during clean cycle of GE JS660EL1ES Ranges?
If there's excessive smoking during the clean cycle of your GE Ranges, press the Cancel/Off pad. Open windows to clear the smoke. Once the LOCK light turns off, wipe up the excess soil and then reset the clean cycle.
Why is the oven light not working in my GE Ranges?
If the oven light in your GE Ranges isn't working, first check if the light bulb is loose or defective and tighten or replace it. If that doesn't work, the pad operating the light might be broken, requiring you to call for service. Also, verify that the oven is not in Sabbath mode by checking the Special Features section.
Why does my GE JS660EL1ES Ranges oven light does not work?
If the oven light does not work, tighten or replace the bulb.
Why does my GE Ranges take so long to preheat?
If your GE Ranges oven sometimes takes longer to preheat to the same temperature, it could be due to cookware or food in the oven. Remove these items to reduce preheat time. Also, the number of racks in the oven can affect preheating time, so remove some racks if necessary.
What does it mean when “F— and a number or letter” flash in the display of GE Ranges?
If "F— and a number or letter" flash in the display of your GE Ranges, it indicates a function error code. Press the Cancel/Off pad and allow the oven to cool for one hour, then try putting the oven back into operation. If the code repeats, disconnect all power to the oven for at least 60 seconds and then reconnect power. If the error persists, call for service.
General| Brand | GE |
|---|---|
| Model Number | JS660EL1ES |
| Product Type | Range |
| Fuel Type | Electric |
| Number of Burners | 5 |
| Oven Capacity | 5.3 cu. ft. |
| Convection | Yes |
| Self-Cleaning | Yes |
| Color/Finish | Slate |
| Voltage | 240V |
| Wi-Fi Connect | Yes |
| Width | 30 in |
To Next Page
