Why there is excessive smoking during clean cycle of my GE JS660EL1ES oven?
If you notice excessive smoking during a clean cycle in your GE Ranges oven, it's likely due to excessive soil or grease. Press the Cancel/Off pad, open windows to ventilate the room, wait for the Locked light to turn off, wipe up the excess soil, and then restart the clean cycle.
What causes pitting (or indentation) of the GE JS660EL1ES cooktop?
If there is pitting (or indentation) of the cooktop, it is likely due to a hot sugar mixture spilled on the cooktop. Call a qualified technician for replacement.
What to do if my GE JS660EL1ES Ranges has a power outage and clock flashes?
This indicates a power outage or surge. Reset the clock. If the oven was in use, reset it by pressing the Cancel/Off pad, setting the clock, and resetting any cooking function.
Why are my GE JS660EL1ES surface units not maintaining a rolling boil?
If the surface units on your GE Ranges aren't maintaining a rolling boil or cooking is not fast enough, it could be due to improper cookware. Ensure you are using flat-bottomed pans that match the diameter of the surface unit. In some areas, low voltage may also be a factor. Covering the pan with a lid can help until the desired heat is achieved.
Why is my GE JS660EL1ES beeping after entering cooking time or start time?
If your GE Ranges is signaling after entering a cooking time or start time, it means you forgot to enter a bake temperature or cleaning time. Touch the Bake pad and the desired temperature, or the Self Clean pad and the desired clean time.
Why does the display on my GE Ranges flash?
If the display on your GE Ranges is flashing, it indicates a power failure. Reset the clock.
Why does my GE JS660EL1ES oven sometimes take longer to preheat?
If your GE Ranges oven sometimes takes longer to preheat, it could be due to cookware or food in the oven; remove these items to reduce preheat time. Also, the number of racks in the oven can affect preheating time; remove some racks if necessary.
Why am I unable to get the display to show “oFFSEt” on my GE Ranges?
If you're unable to get the display to show “oFFSEt” on your GE Ranges, make sure the Broil Hi/Lo and Bake pads are touched at the same time and held for 3 seconds.
Why GE JS660EL1ES Ranges surface units will not maintain a rolling boil?
If the surface units on your GE Ranges aren't maintaining a rolling boil or cooking isn't fast enough, it might be because you're using the wrong type of cookware. Make sure you're using flat pans that match the diameter of the surface unit. If the power voltage in your area is low, cover the pan with a lid to help retain heat until the desired temperature is reached.
Why my GE JS660EL1ES Ranges drawer does not slide smoothly or drags?
If the drawer on your GE Ranges doesn't slide smoothly or drags, it could be out of alignment. Fully extend the drawer and push it all the way in. Also, the drawer might be overloaded or the load unbalanced. Reduce the weight and redistribute the contents.
General| Brand | GE |
|---|---|
| Model Number | JS660EL1ES |
| Product Type | Range |
| Fuel Type | Electric |
| Number of Burners | 5 |
| Oven Capacity | 5.3 cu. ft. |
| Convection | Yes |
| Self-Cleaning | Yes |
| Color/Finish | Slate |
| Voltage | 240V |
| Wi-Fi Connect | Yes |
| Width | 30 in |
To Next Page
