What to do if my GE Ranges oven does not work?
If your GE Ranges oven isn't working, start by checking the fuse box or circuit breaker in your home and replace the fuse or reset the circuit breaker if needed. Also, ensure that the oven controls are properly set. Finally, make sure the oven is not in Sabbath Mode.
What to do if my GE JS645SLSS Ranges clock and timer do not work?
If the clock and timer on your GE Ranges are not working, first check the fuse box or circuit breaker in your home and replace the fuse or reset the circuit breaker if necessary. Also, ensure that the range is fully plugged into a properly grounded electrical outlet. Check the clock display settings in the Special Features section and ensure that the oven controls are properly set.
What to do if my GE JS645SLSS Ranges oven door will not open after a clean cycle?
If the oven door on your GE Ranges will not open after a clean cycle, it's likely that the oven is still too hot. Allow the oven to cool down below the locking temperature.
What to do if my GE JS645SLSS Ranges oven will not self-clean?
If your GE Ranges oven will not self-clean, first ensure that the oven has cooled down, as the temperature may be too high to start a self-clean operation. Also, make sure the oven door is completely closed.
What to do if my GE JS645SLSS Ranges oven is not clean after a clean cycle?
If your GE Ranges oven is not clean after a clean cycle, clean up heavy spillovers before starting the clean cycle. Heavily soiled ovens may need to self-clean again or for a longer period of time.
What to do if power outage, clock flashes on my GE Ranges?
If there is a power outage or surge, reset the clock on your GE Ranges. If the oven was in use, you must reset it by pressing the Cancel/Off pad, setting the clock and resetting any cooking function.
Why are my GE JS645SLSS surface units not maintaining a rolling boil?
If the surface units on your GE Ranges aren't maintaining a rolling boil or cooking is not fast enough, it could be due to improper cookware. Ensure you are using flat-bottomed pans that match the diameter of the surface unit. In some areas, low voltage may also be a factor. Covering the pan with a lid can help until the desired heat is achieved.
Why is the DOOR LOCK light on when I want to cook in my GE JS645SLSS Ranges?
The DOOR LOCK light is on because the oven door is locked. This happens when the temperature inside the oven has not dropped below the locking temperature. Press the Cancel/Off pad and allow the oven to cool down.
How to fix GE Ranges surface units that do not work properly?
If the surface units on your GE Ranges are not working, first check your home's fuse box or circuit breaker and replace the fuse or reset the breaker if necessary. Also, verify that the cooktop controls are correctly set for the surface unit you are attempting to use.
Why is my GE JS645SLSS oven temperature too hot or too cold?
If you find that your GE Ranges oven temperature is too hot or too cold, the oven temperature may need adjustment. See the Special Features section for instructions.
Crucial safety warning and instructions for securing the range to prevent tipping hazards.
Fundamental safety instructions for operating the appliance, covering installation and general use.
Warnings against storing flammable items near the range and preventing fires.
Guidelines for safe operation of the surface units and radiant glass cooktop.
Specific safety warnings and operating procedures for the oven.
Instructions on how to use and set the surface heating elements.
Explanation of the function and operation of each oven control pad.
Details on the warranty period and what GE Appliances covers.
General| Brand | GE |
|---|---|
| Model | JS645SLSS |
| Type | Slide-In |
| Fuel Type | Electric |
| Number of Burners | 5 |
| Oven Capacity | 5.3 cu. ft. |
| Self-Cleaning | Yes |
| WiFi Connect | No |
| Color | Stainless Steel |
| Convection Oven | Yes |
| Cooktop Surface | Glass |
| Width | 30 in |
To Next Page
