SH. 2 of 4 31-17264
THERMAL SWITCH
7KHWKHUPDOVZLWFKLVORFDWHGRQWKHÀRRURIWKHFRPSRQHQWFRPSDUWPHQW
in front of the fan motor. The thermal switch is wired in series with the
lock motor switches. The limit switch opens at 240°F and closes when
temperatures cool below 190°F. If the thermal switch opens during:
1. Oven Temperature Below 600°F, program is cancelled when thermal switch
opens. Lock motor will run and the words “LOCK” and “DOOR” will be
ÀDVKLQJLQWKHGLVSOD\
2. Oven Temperature Above 600°F, any mode of operation control will go to
-F9- failure code. When this condition exists, check the fan operation (look
for obstructions), inspect oven installation (make sure grille areas are not
blocked), oven insulation and lock circuit.
BAKE THERMAL SWITCH
The bake thermal switch is wired in series with the lock motor switches.
The limit switch opens at 169°F and closes at 140°F. If the thermal switch
opens during Bake, the program is cancelled and the lock motor will run. The
ZRUGV³/2&.'225´ZLOOÀDVKLQWKHGLVSOD\
To Next Page
Loading...
Need help?
General
