Why "LOCK DOOR" flashes in the display of my GE JS760BL2TS?
If “LOCK DOOR” is flashing in the display of your GE Ranges, it means the self-clean cycle has been selected, but the door isn't closed. Close the oven door and latch it if your unit has a manual latch.
What to do when power outage makes clock flashes in GE JS760BL2TS?
If you experience a power outage and the clock on your GE Ranges is flashing, reset the clock. If the oven was in use, you must reset it by pressing the Cancel/Off pad, setting the clock, and resetting any cooking function.
What to do if GE JS760BL2TS oven is not clean after a clean cycle?
If your GE Ranges oven isn't clean after a clean cycle, it could be due to a couple of reasons. The oven controls may be improperly set. Also, the oven might have been heavily soiled; clean up heavy spillovers before starting the clean cycle, and for heavily soiled ovens, consider running the self-clean cycle again or for a longer period.
What to do if there is pitting of the GE JS760BL2TS Ranges cooktop?
If there is pitting (or indentation) on your GE Ranges cooktop, it's likely due to a hot sugar mixture spilling on it. Call a qualified technician for replacement.
What to do if GE Ranges oven door will not open after a clean cycle?
If your GE Ranges oven door won't open after a clean cycle, it's likely because the oven is still too hot. Allow the oven to cool below the locking temperature.
Why is there water remaining on oven floor after GE Ranges Steam Clean cycle?
If there is water remaining on the oven floor after the Steam Clean cycle in your GE Ranges, this is normal. Remove any remaining water with a dry cloth or sponge.
Why is the oven door crooked on my GE JS760BL2TS Ranges?
The oven door on your GE Ranges may be crooked because it is out of position. Because the oven door is removable, it sometimes gets out of position during installation. To straighten the door, reinstall the door. See the 'Lift Off Oven Door' instructions in the "Care and Cleaning" section.
Why is my GE JS760BL2TS Ranges emitting a “burning” or “oily” odor?
A “burning” or “oily” odor emitting from the vent of your new GE Ranges is normal and will disappear in time. To speed up the process, set a self-clean cycle for a minimum of 3 hours. See the Cleaning the Oven section.
Why GE JS760BL2TS surface units will not maintain a rolling boil?
If the surface units on your GE Ranges aren't maintaining a rolling boil or cooking isn't fast enough, it could be due to improper cookware. Ensure you're using flat-bottomed pans that match the diameter of the surface unit. In some areas, low voltage may be a factor; covering the pan with a lid can help until the desired heat is achieved.
Why my food does not bake properly in GE Ranges?
If your food isn't baking properly in your GE Ranges, several factors could be contributing to the issue: * The oven controls may be improperly set. * The rack position might be incorrect, or the rack isn't level. * You might be using incorrect cookware or cookware of an improper size. * The oven temperature may need adjustment. * Ingredient substitution can change the recipe outcome.
General| Brand | GE |
|---|---|
| Model | JS760BL2TS |
| Type | Slide-In |
| Fuel Type | Electric |
| Cooktop Surface | Ceramic Glass |
| Number of Burners | 5 |
| Oven Capacity | 5.3 cu. ft. |
| Self-Cleaning | Yes |
| Wi-Fi Connect | Yes |
| Convection | Yes |
| Width | 30 in. |
To Next Page
