SU~ACE
CONTROLS
(continued)
Dual Surface Unit Switch
The left rear surface
o
unit has two cooking
sizes to select from
a
,:.
so you can match the
size of the unit to the
size of the cookware
you are using.
To use the
large
::
(9-inch) surface unit,
:;:
push in the top
o
portion of the COIL SIZE switch
next to the control knob. Push in
and turn the control knob to
the
desired setting.
To use the
small (6-inch) surface
unit, push in the bottom portion
of
the COIL SIZE switch. Push in
and turn the control knob to the
desired setting.
Hot Surface Indicator Light
A “HOT SURFACE” light will glow brightly when
any radiant element is turned on, and
will
remain lit
after the unit is turned off until the
cooktop
is cool
enough to touch. Each element has its own “HOT
SURFACE” indicator light.
●
It
comes on instantly when the unit is turned on.
●
It stays on even after the unit is turned off.
*
It glows brightly until the cooktop is cool enough
[0
touch.
—
,—
-----
‘-–’-
A “HOT SURFACE” light will glow brightly when any
radiant element is turned on.
12
To Next Page
Loading...
