EasyManua.ls Logo

GE JSP38

GE JSP38
40 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
r-’
ADJUST
THE
OVEN
THE~OsTAT—
DO
IT
YOURSELF!
You may find that your new oven cooks differently
than the one it replaced.
We recommend that you
use your new oven for a few weeks to become more
familiar with it, following the times given in your
recipes as a guide.
If you think your new oven is too hot or too cold,
you can adjust the thermostat yourself.
If you think
it is too hot, adjust the thermostat to make it cooler. If
you think it is too cool, adjust the thermostat to make
it hotter.
We
do not recommend the use of inexpensive
thermometers,
such as those found in grocery stores,
to check the temperature setting of your new oven.
‘rhese
thermometers may vary
2040
degrees.
To Adjust the Thermostat:
@
1.
Press the BAKE pad.
BAKE
A
2.
Select an oven temperature between
500°F.
and
550°F.
3. Immediately, before the BAKE indicator stops
flashing, press and hold the BAKE pad for about
4 seconds. The display will change to the oven
adjustment display.
A
4. The oven temperature can be adjusted
up to
(+)
35°F.
hotter or (–)
35°F.
cooler.
@
Use the INCREASE or DECREASE
pads to select the desired change in
v
@
the display.
o
5.
After you have made the adjustment,
CLEAR
press the CLEAWOFF pad to go back
OFF
to the time of day display. Use your oven
as you would normally.
NOTE:
This adjustment will not affect the broiling or
the self-cleaning temperatures. It will be remembered
when power is removed.
24

Other manuals for GE JSP38

Related product manuals