GE JTP44 Use And Care Guide

ROASTING
Do not lock the oven door with the latch during roasting. The latch is
used for self-cleaning only.
NOTE: The oven has controls for the upper oven and the lower oven.
Be sure to set the correct control. Pads on the left side of the panel are
for the upper oven. Pads on the right side of the panel are for the lower
oven. T1~e TIMER ON/OFF, COOK TIME, STOP TIME, INCREASE
and DECREASE pads can be used for either oven,
Roasting is cooking by dry heat. Tender meat or
poultry can be roasted uncovered in your oven.
Roasting temperatures, which should be low and
steady, keep spattering to a minimum.
Roasting is really a baking procedure used
for meats.
Therefore, the oven controls are set for Baking or
Timed Baking. (You may hear a slight clicking sound,
indicating the oven is working properly.) Timed
Baking will turn the oven on and off automatically.
Most
meats continue to cook slightly while standing,
after being removed from
the oven. The standing time
recommended for roasts is 10 to 20 minutes. This
allows roasts to firm up
and makes them easier to
carve. The internal temperature will rise about 5° to
10°F.; to compensate for temperature rise, if desired,
remove the roast from oven sooner (at 5° to
10OF. less
than the temperature in the Roasting Guide).
Remember that food will continue to cook in the hot
oven
and therefore should be removed when the
desired internal temperature has been reached.
2. Check the weight of
the meat. Place, fat
side up, or poultry
breast-side-up, on a
roasting rack in a
I
shallow pan. The
melting
;at will baste the meat. Select a pan as
close to the size of the meat as possible. (The
broiler pan with rack is a good pan for this. )
NOTE: A fan may automatically turn on and off to
cool internal parts. This is normal and the fan may
continue to run even after the oven is turned
off.
❑
3. Press the BAKE pad.
BAKE
A
A
4. Press the INCREASE or DECREASE
@
pad until the desired temperature
is displayed.
The oven will start automatically.
v
e
The word “ON” and “1000’” will be
displayed. As the oven heats Lip, the
display will show the changing
temperature. When the oven reaches the
set temperature a tone
will sound.
o
5. Press the CLEAWOFF pad when
CLEAR
roasting is finished and then remove
OFF
the food from the oven.
To change the oven temperature during
roasting,
press the BAKE pad and then the
INCREASE or DECREASE pad to get the new
temperature.
Use of Aluminum Foil
You can use aluminum foil to line the broiler pan.
This makes clean-up easier when using the pan
for
marinating, cooking with fruits, cooking heavily
cured meats or basting food during cooking. Press
the foil tightly around the inside of the pan.
16

GE JTP44 Specifications

General

Brand	GE
Model	JTP44
Category	Oven
Language	English