Installation
Instructions
Downdraft Vent
System
I If you have questions, call 800.GE.CARES or visit our Website at: www.GEAppliances.com I
BEFORE YOU BEGIN
Read these instructions completely and
carefully.
• IMPORTANT - Savethese
instructions for local inspector's use.
• IMPORTANT - Observeall
governing codes and ordinances.
• Note to Installer - Be sure to leave these
instructions with the Consumer.
• Note to Consumer - Keep these
instructions for future reference.
• Note - This appliance must be properly
grounded.
• Proper installation is the responsibility of
the installer.
• Product failure due to improper installation
is not covered under the Warranty.
TOOLS YOU WILL NEED
Fiat-blade screwdriver
Pliers
Jig saw
Duct tape
Ductwork to suit
the installation
REMOVE PACKAGING
Open the carton and remove parts package.
Check contents to be sure all pieces are
present. (The parts package may be attached
to the power cord.)
Remove the shipping materials. Remove the
carton and set aside. The carton can be used
as a pad when changing or adjusting vent
direction.
PARTS INCLUDED
_ Stabilizing brackets
(all models) (4)
Remote raise/lower assembly (for 36" models only)
Wire box (2) Plastic strain Wire and white
and screws (4) relief (2) connector (1)
Switch cover Attachment
plate (1) bracket (1)
6
To Next Page
Loading...
Need help?
General
