Before youcall for service...
Troubleshooting tips
Save time and money! Review the chart below first
and you may not need to call for sen/ice,
Possible Causes What ToDo
The vent is not fully extended. • Press the Raise/Lower switch.
The blower control switch • Slide it to the right.
may be in the 0FFposition.
Vent not plugged into an outlet. • Plug vent into a 120V power outlet.
Raise/Lower switch did not • Hold switch down for a couple of seconds to
engage llft motor, activate motor.
Circuit breaker may have • Check circuit breaker: Reset if necessm'y.
tripped.
Remote switch not plugged in.
• Check all connections between the remote switch
and vent body.
18
To Next Page
Loading...
