GE LP33 Series 80 User Manual

GE Digital Energy
Power Quality
B
at
t
e
r
y
S
y
s
t
e
m
D
i
g
i
t
a
l
E
n
e
r
g
y
U
P
S
S
y
s
t
e
m
D
i
g
i
t
a
l
E
n
e
r
g
y
User Manual
Uninterruptible Power Supply
LP33 Series 80 & 100
80 & 100kVA / 208Vac UL / S1
GE Consumer & Industrial SA
General Electric Company
CH – 6595 Riazzino (Locarno)
Switzerland
T +41 (0)91 / 850 51 51
F +41 (0)91 / 850 52.52
www.gepowerquality.com
imagination at work

GE LP33 Series 80 Specifications

General

Input Voltage	120 VAC
Output Voltage	120 VAC
Frequency	50/60 Hz
Typical Recharge Time	6 hours to 90% capacity
Operating Temperature	0°C to 40°C (32°F to 104°F)
Storage Temperature	-15°C to 45°C (5°F to 113°F)
Relative Humidity	0% to 95% non-condensing

Summary

SAFETY RULES

LAYOUT

2.1 LAYOUT LP33 Series 80 & 100

Overview of the physical arrangement and components of the UPS unit.

INTRODUCTION

3.1 GENERAL DESCRIPTION

Provides a high-level overview of the LP33 Series Uninterruptible Power Supply.

DESCRIPTION

4.1 BLOCK DIAGRAM AND MAIN ELEMENTS DESCRIPTION

Details the UPS block diagram and describes key functional elements.

4.2 OPERATION MODES

Explains the different operating modes like VFI and ECO Mode.

4.3 RPA PARALLEL SYSTEM

Describes the Redundant Parallel Architecture for system expansion.

4.4 UPS PARALLELED ON THE SAME BATTERY

Discusses configurations where UPS units share a common battery.

4.5 SERVICE AND TECHNICAL SUPPORT

Information on obtaining support and contact details.

4.6 RECYCLING AT THE END OF SERVICE LIFE

Guidelines for environmentally responsible disposal of the UPS.

SYSTEM HANDLING

5.1 CONTROL PANEL

Overview of the UPS front panel interface and its components.

5.2 TABLE OF FUNCTIONS AND INDICATIONS ON CONTROL PANEL

Details the functions and indicators on the UPS control panel.

5.3 SWITCHES

Explains the operation of key switches like Q1 and Q2.

LCD SCREEN

6.1 HOME SCREEN

Displays the main status screen of the UPS, including key parameters.

6.2 METERING

Details how to view electrical parameters and statistics on the LCD.

6.3 ALARMS

Covers UPS alarms, messages, event lists, and reports (6.3.1-6.3.4).

6.4 SETUP

Allows user to customize UPS functions and view identification data.

6.5 COMMANDS

How to execute UPS operation commands like Lamp Test and Shutdown.

OPERATION

7.1 PROCEDURES FOR SINGLE LP33 Series 80 & 100

Step-by-step guides for operating a single UPS unit.

7.2 PROCEDURES FOR LP33 Series 80 & 100 PARALLEL SYSTEM

Guides for operating the UPS in a parallel system configuration.

OPTIONS

8.1 OPTIONS GENERAL VIEW

Overview of available optional features and accessories for the UPS.

MAINTENANCE

9.1 GENERAL MAINTENANCE

Discusses periodic checks and preventive maintenance for UPS reliability.

9.2 COOLING FAN MAINTENANCE

Information on the expected life and maintenance of cooling fans.

9.3 OTHER COMPONENTS WITH LIMITED LIFETIME

Recommends replacement for components like AC and DC Capacitors.

9.4 BATTERY MAINTENANCE

Covers battery life, management features, testing, and replacement.

9.5 SERVICE REQUIRED

Indicates when professional service might be necessary.

NOTES

10.1 NOTES FORM

A form for recording maintenance and operational details.