To Next PageTo Next Page
Need help?Do you have a question about the GE SG SERIES 10 and is the answer not in the manual?
Crucial safety guidelines for UPS installation and operation.
Basic introduction to the SG Series UPS system.
Explanation of main elements, block diagram, and operational modes.
Covers parallel operation, common battery setups, and recycling.
Physical layout and component views for 10 and 20 kVA UPS units.
Physical layout and component views for 30 and 40 kVA UPS units.
Details the functions and indicators found on the UPS control panel.
How to access and view real-time operational data on the LCD.
How to view alarm and event logs, messages, and their details on the LCD.
Procedure for editing parameter values using the LCD interface.
Description of user-adjustable parameters for system configuration.
Setting up telephone numbers for remote communication and alerts.
Options for customizing the LCD display, such as UPS name and language.
Configuration and commands for connecting and using a serial printer for reports.
A comprehensive list of alarm codes, their meanings, and associated actions.
System messages, event logging, and a form for recording diagnostic data.
Step-by-step instructions for operating a single UPS unit.
Procedures for operating UPS units in parallel configurations for capacity or redundancy.
Detailed steps for powering up and starting the SG Series UPS.
Procedures for maintenance shutdowns, bypass transitions, and system restarts.
Procedure to restore the UPS to normal operation after an EPO activation.
Steps for starting the UPS when configured as a frequency converter.
Step-by-step instructions for starting up a parallel UPS system.
Procedures for shutting down parallel units and safely removing them from the system.
Procedures for reconnecting units and restarting parallel UPS systems.
Restoring a parallel system to normal operation after an EPO event.
Steps for starting up a parallel system that shares a common battery.
Procedures for shutting down and separating parallel units with a common battery.
Procedures for reconnecting units and restarting common battery parallel systems.
Restoring a common battery parallel system to normal operation after an EPO event.
Details on the serial port for management and relay contacts for alarms.
Details on programmable inputs, generator signaling, and external maintenance bypass functionality.
Connecting an external emergency power off switch to the EPO input terminal.
Overview of optional features like RPA kits, communication cards, and filters.
Details on connecting the optional Remote Signaling Box for UPS monitoring.
Guidance on service checks, fan maintenance, and replacing limited-life components.
Recommendations for battery maintenance, testing, and UPS room environmental conditions.
A template for documenting UPS operations, maintenance, and events.
Specific warranty terms, conditions, and restrictions on product usage.
Guidelines for installation and commissioning by certified electrical installers and technicians.
General