To Next PageTo Next Page
Need help?Do you have a question about the GE 8 Series and is the answer not in the manual?
General safety advice before installation, start-up, and maintenance.
Explanation of the RPA symbol for parallel system operation.
General handling, installation, and storage precautions for the UPS.
Safety precautions and handling guidelines for batteries.
Explanation of safety symbols like CAUTION, DANGER, and DO NOT TOUCH.
Internal and rack views of the SitePro UPS with component labels.
Highlights key features like RPA, High Efficiency, and flexibility.
Description of key components like Control System, Rectifier, Inverter, and Bypass.
Explains the Voltage Frequency Independent operation mode.
Describes the Super Eco Mode for energy saving.
How the UPS operates during a mains power failure.
How the UPS operates when mains power is restored.
Explanation of the automatic transfer to mains via bypass.
How to use the manual bypass for maintenance.
Overview of paralleling UPS units for capacity or redundancy.
Details on Redundant Parallel Architecture features.
Explains system control, synchronization, and load sharing in parallel operation.
Specific recommendations for rectifiers sharing a common battery.
Details on technical support, warranty terms, and environmental recycling.
Guidelines for safely transporting and lifting the UPS.
Provides physical dimensions and weight specifications for the UPS models.
Instructions for receiving and storing the UPS unit.
Specifies environmental and placement requirements for UPS installation.
Details on air intake, exhaust, and heat dissipation for proper cooling.
Steps for safely unpacking the UPS and checking for transport damage.
Guidelines for connecting the mains input power to the UPS.
Recommendations for circuit breaker sizing and cable selection.
Illustrates connection diagrams and requirements for installation.
Detailed information on terminal connections for power supply.
Selecting the AC input source for the UPS power supply.
Configuration and operation as a frequency converter.
Power wiring instructions for parallel RPA systems.
Steps for connecting the control bus cables in parallel systems.
Guidance on routing and connecting control bus cables.
Description of the UPS control panel elements and key functions.
Detailed explanation of control panel keys and their functions.
Explanation of UPS status LEDs and synoptic diagram.
How to navigate the LCD screen menus (METER, ALARMS, SETUP, CMDS).
How to view electrical parameters and statistics using the METER function.
How to access and interpret alarms, events, and messages from the LCD.
How to configure UPS parameters via the SETUP menu.
Executing operational commands like LAMP TEST, INVERTER ON/OFF.
Step-by-step procedures for starting, shutting down, and restoring a single UPS.
Procedure for safely shutting down a single UPS unit.
Steps to return a single UPS to normal VFI operation from bypass.
Procedure for a complete power-down of a single UPS system.
How to restore normal operation after a 'Load Off' command.
Step-by-step procedures for starting a parallel UPS system.
Procedure for shutting down a parallel UPS system.
Returning a parallel system to normal VFI from bypass.
Separating or reconnecting UPS units within a parallel configuration.
Procedure for a complete power-down of a parallel UPS system.
Restoring a parallel system after a 'Load Off' command.
Details on serial ports, EPO connection, and output signals.
Using input contacts and the Emergency Power Off feature.
Using generator status and external bypass switch inputs.
Options for remote management via SNMP and software.
Information on built-in options, additional cabinets, and configurations.
Configurations and weights of different UPS and cabinet options.
Wiring for Auxiliary Power Supply and other options.
Connection details for the optional remote signalling box.
Recommendations for service checks, fan cleaning, and component replacement.
Guidelines for battery testing, charging, and maintaining room environment.
Detailed checklist for preventive maintenance tasks.
Reference to technical data sheets and schematic diagrams.
Information about the included CD-ROM containing documentation.
General