Need help?Do you have a question about the GE NetworX NX-8-EUR and is the answer not in the manual?
General| Type | Control Panel |
|---|---|
| Zones | 8 |
| Keypads | Up to 8 |
| Partitions | 2 |
| Battery Backup | 12 VDC, 7 Ah |
| Operating Temperature | 32°F to 120°F |
| Outputs | 2 (expandable) |
Details on how to order the NX-8-EUR control panel and related products.
Configures the panel to automatically arm at a specified time.
Explains available reporting formats like Contact ID and SIA.
Tests system without activating siren/communicator.
Allows using eight zones as sixteen normally closed zones.
How to program address and partition for LED keypads.
Procedure for changing user codes.
Assigns user authority levels for partitions and features.
Adjusts LCD viewing angle and brightness.
Sets custom messages for specific zones or lines.
Configures various keypad features and options.
User interface functions available on the NX-148 LCD keypad.
Instructions for programming via LED keypads.
How the panel automatically enrolls connected devices.
Instructions for programming via LCD keypads.
Programming the first telephone number for reporting.
Lists available communicator formats for reporting.
Settings for panel downloading.
Configuring entry and exit delay times.
Lists default zone types and their descriptions.
Configures zone types for specific zone ranges.
Selects partitions for specific zone ranges.
Enables various system features and reporting options.
Defines system timing functions like delays and timers.
Sets requirements for user codes and programming access.
Selects partitions for auxiliary output activation.
Configures special timing features for auxiliary outputs.
Maps events to auxiliary outputs.
Configures automatic testing intervals and reports.
Sets panel opening and automatic disarming times.
Sets panel closing and automatic arming times.
Sets restore codes for slow speed formats.
Sets bypass codes for slow speed formats.
Sets tamper codes for slow speed formats.
Sets trouble codes for slow speed formats.
Sets sensor low battery codes for slow speed formats.
Sets account code for partition 1 reporting.
Enables features and reports for partition 2.
Sets entry/exit timers for partition 2.
Sets account code for partition 3 reporting.
Enables features and reports for partition 3.
Sets entry/exit timers for partition 3.
Sets alarm event code for zone configuration group 1.
Selects characteristics for zone configuration group 1.
Sets alarm event code for zone configuration group 2.
Selects characteristics for zone configuration group 2.
Sets alarm event code for zone configuration group 3.
Selects characteristics for zone configuration group 3.
Details on seating the PC board guides for mounting.
Instructions for securing the PC board with screws.
Ensuring the PC board slides freely in the guides.
Descriptions for telephone, earth ground, and AC power terminals.
Details for siren output or voltage output terminals.
Terminal for data connection to keypads and expanders.
Common terminal for keypads, expanders, and relays.
Positive terminal for keypads and expanders.
Terminal for smoke detector power.
Positive terminal for powered devices (except smoke/keypads).
Descriptions for zone loop terminals.
Electrical and physical specifications for the NX-8 control panel.
Specifications for NX-108, NX-116, and NX-124 keypads.
Specifications for NX-1308, NX-1316, and NX-1324 keypads.
Specifications for the NX-148 keypad.
Contact ID and SIA codes for manual test reports.
Contact ID and SIA codes for autotest reports.
Contact ID and SIA codes for open/close reports.
Contact ID and SIA codes for expander trouble/restore.
Contact ID and SIA codes for zone trouble/restore.
Contact ID and SIA codes for zone tamper/restore.
Contact ID and SIA codes for zone bypass/restore.
SIA codes for holdup alarms.
SIA codes for fire alarms.
SIA codes for burglary alarms.
SIA codes for tamper alarms.
Contact ID codes for general alarms.
Contact ID codes for manual fire alarms.
Device numbers for keypad expander trouble reporting.
Device numbers for NX-320E power supply expander trouble.
Device numbers for NX-448E wireless receiver expander trouble.
Device numbers for output module expander trouble reporting.
Device numbers for NX-216 hardwired expander trouble.
To Next Page