Need help?Do you have a question about the GE NetworX NX-8E and is the answer not in the manual?
General| Keypads | Up to 8 |
|---|---|
| Zones | 8 |
| Power Supply | 16.5VAC, 40VA |
| Battery Backup | 12VDC, 7AH |
| Operating Temperature | 0°C to 49°C (32°F to 120°F) |
Explains the status and meaning of various indicator lights on the keypad.
Describes the purpose and operation of the five function keys on the keypad.
Details the functionality of the emergency activation keys for alerts.
Section for detailing function codes and their controls.
Section to mark which emergency keys are enabled.
Section listing general programmed functions.
Fields for configuring system entry and exit delay timings.
Area designated for describing individual zones.
Basic operation, codes, and LED indicators for the security system.
Identifies factors influencing the overall security level of the system.
Key considerations and facts for preparing a safety plan.
Defines terms related to system arming and entry/exit delays.
Defines terms for system setup like partitions and codes.
Defines terms related to alarms, bypassing zones, and cancellation.
Explains the meaning of Armed, Bypass, Cancel, Chime, Exit, Fire, and Instant lights.
Explains the Power and Fire lights indicating power status and trouble.
How to activate a fire alarm and send a report.
How to activate an auxiliary alarm and send a report.
How to activate a panic alarm and send a report.
Steps for arming the system in Away and Stay modes.
Details on auto-bypass and auto-instant features in Stay mode.
How to utilize the Quick Arm function for faster system arming.
Adjusting system modes like Stay/Instant with the system already armed.
Procedure for correctly disarming the security system.
How to cancel or abort alarm reports to the central station.
Steps for bypassing, group bypassing, and unbypassing zones.
Instructions on how to turn the door chime feature on or off.
Process to add, delete, or modify user access codes.
Process to set user permissions and access levels.
Detailed steps for granting partition access to user codes.
Procedure to set or adjust the keypad sounder tone.
Temporarily switching between system partitions.
How to access and view past alarm events.
How to run battery, communicator, or siren tests.
Resets smoke detectors, zone troubles, and zone tampers.
Procedure to input and set the current system date.
Procedure to input and set the current system time.
Table for converting time to hour codes for system clock setting.
Explains the various reasons for keypad beeps and sounds.
Explains lights indicating system faults and required service.
Explains zone indicators for tampers, low battery, and supervision loss.
Explains indicators for telephone line issues and communication failures.
Indicator for system time loss due to power interruption.
Guidelines and steps for creating a building evacuation plan.
Provides visual examples of evacuation routes for homes.
To Next Page