Need help?Do you have a question about the GE Advisor MASTER ATS111 series and is the answer not in the manual?
General| Brand | GE |
|---|---|
| Model | Advisor MASTER ATS111 series |
| Category | Control Panel |
| Language | English |
Explains variations in system programming and feature availability based on configuration.
Defines the terminology used for premises and system components in the interface.
Highlights the importance of regularly testing the security system for proper operation.
Details the functions and layout of the ATS111x keypad model.
Details the functions and layout of the ATS110x keypad model.
Explains how messages and information are displayed on the keypad's screen.
Indicates the operational status of different security areas on the keypad.
Visual indicators for system-wide alarm events and breaches.
Displays visual cues for system operational faults or errors.
Defines time-based rules for restricting or enabling access functions.
Groups users for specific alarm control functions and menu access.
Assigns users to groups for controlling access to specific doors.
Assigns users to groups for controlling access to specific floors via lifts.
Details how PIN codes are used for system authentication and function access.
Procedure for initiating a silent alarm to alert security personnel.
Steps to turn off the duress facility after activation.
Instructions for opening doors using a personal identification number.
Instructions for opening doors using an access card.
Guidance on when to arm the system and time limits for leaving areas.
Reasons why specific areas may not be armable, like open zones.
Detailed instructions for successfully arming the system.
Guidance on when to disarm the system and time limits for entry.
Steps to take if an alarm condition exists during disarming.
Reasons why specific areas may not be disarmable by the user.
Detailed instructions for successfully disarming the system.
Describes alarms occurring within the premises, requiring on-site checks.
Covers alarms triggered by zone activation when the area is armed or disarmed.
Details alarms related to system faults, tampering, or communication failures.
Procedure to acknowledge and resolve local alarm events.
Steps to reset specific zones that have triggered an alarm.
Guidance on resolving alarm issues, including faulty zones and system conditions.
Instructions for reviewing past alarm events and system history.
Explains how menu sections are organized within the manual and system.
Detailed steps on how to enter and navigate the system's menu.
Procedure to check the current status of all zones in the system.
Instructions to view zones that are currently active or open.
Procedure to identify and view zones currently in an alarm state.
Procedure to check which zones have been excluded from system operation.
Instructions for viewing past alarm and access control events.
Methods for searching and playing back historical system data.
How to view the outcomes of system disarm and arm tests.
Procedure for requesting a service call to the central station.
Shows the current frame position on security camera films for logging.
Instructions to view descriptive names assigned to system zones.
Procedure to exclude a faulty or problematic zone from system operation.
Procedure to re-include an inhibited zone back into system operation.
Procedure for testing the operational status of individual security zones.
Instructions for initiating an automated disarm test sequence.
User-initiated process to change their personal PIN code.
Procedure for adding, deleting, or modifying user accounts and settings.
Covers operations for creating, deleting, and displaying user information.
Methods to view the total number of users and select Card Learn RAS.
Procedure to verify the current system time and date.
Instructions for setting the system's time and date accurately.
Configuration steps for managing daylight saving time changes.
Method to fine-tune the system clock for daily time corrections.
Procedure to exclude or include Remote Arming Stations (RAS) or DGPs.
Control access for service technicians to installer menu functions.
Procedure to reset film frame counts for individual or all cameras.
Instructions for selecting and programming door group access settings.
Instructions for selecting and programming floor group access settings.
Procedure to record specific dates as holidays for access control.
Method for opening a door using the LCD arming station interface.
Instructions for unlocking, locking, disabling, or enabling doors.
Procedure to print the entire system event history.
To Next Page