ATS Control Panel
Manager's manual
56
1 DST end at FIRST Sunday of the month
2 DST end at SECOND Sunday of the month
3 DST end on THIRD Sunday of the month
4 DST end on FOURTH Sunday of the month
5 DST end on LAST Sunday of the month
6. Press [ENTER], [ENTER] to accept:
5- Last Sunday, Month 00
End Sunday
7. Enter the month number when the time changes from summertime to wintertime and press [ENTER]:
5- Last Sunday, Month 10
End Month
The programming of DST is completed.
To adjust the internal clock for correct timings
1. Enter option 4:
Daily Adjustmemt (Sec).: +0
*-Change, sec:
2. Press [MENU*] to change the sign and give the correction number of seconds to add or to subtract daily.
Then press [ENTER].
To Next Page
Loading...
