29
3. Zones in alarm
Use this function to list all zones that are in alarm.
Alarms must be acknowledged and reset.
To list all zones in alarm
1. Access menu option 3.
What happens next depends on whether there are zones in alarm:
No zones in alarm Zones are in alarm
No Alarms
Press ENTER
Zones in alarm are listed either one at a time, or as a list of
numbers:
Alarm On 3, Fire Escape Door
NEXT or ENTER
or
Alarm On 1, T2, 6.
Zone No:
2. From the display you can now:
Option Action Result
Display the complete zone name
Enter the zone number and press
[ENTER]
Displays the complete zone name.
(Excludes the status No alarms).
Update the list Press [NEXT] Updates the list of zone status.
Exit Press [ENTER] Exits the menu option.
A ‘T’ preceding the zone number identifies tamper alarms.
See also: Types of alarms on page 20; Menu option 1, Panel status on page 27; What to do when there is an alarm on page
22.
To Next Page
Loading...
