GE Allegro

GE
Security
P/N 466-1822 • REV F • ISS 09OCT09
Allegro Control Panel User
Manual

GE Allegro Specifications

General

Manufacturer	GE
Type	Control Panel
Display Type	LCD
Frequency	50/60 Hz
Operating Temperature	0°C to 50°C

Summary

Checking system status

Alarms

Preventing accidental alarms

Offers guidelines and system features to reduce the occurrence of unintentional alarms.

To abort a nonfire alarm

Panic alarms

Basic operating commands

Arming and disarming your system

To disarm to level 1 using the panel keypad

To disarm to level 1 using a keychain touchpad

To disarm to level 1 using a wireless touchpad

Arming level 2

To arm to level 2 using the panel keypad

Guides users on how to arm the system to Level 2 using the panel keypad.

To arm to level 2 using a keychain touchpad

Details how to arm the system to Level 2 using a keychain touchpad.

To arm to level 2 using a wireless touchpad

Explains how to arm the system to Level 2 using a wireless touchpad.

Arming level 3

To arm to level 3 using the panel keypad

Provides instructions to arm the system to Level 3 using the panel keypad.

To arm to level 3 using a keychain touchpad

Details how to arm the system to Level 3 using a keychain touchpad.

To arm to level 3 using a wireless touchpad

Explains how to arm the system to Level 3 using a wireless touchpad.

Arming options

Exit delay time

Entry delay time

No delay

To arm to level 2 (or 3) with no delay using the panel keypad

To arm to level 2 (or 3) with no delay using the wireless touchpad

To arm directly to level 3 with no delay using the keychain touchpad

Bypassing sensors

Direct bypass

Indirect bypassing

To bypass sensors indirectly

To activate (unbypass) bypassed sensors

Programming

User access codes

Emphasizes keeping codes confidential and avoiding predictable patterns.

Primary user code

Explains the function and importance of the primary user code.

To enter user programming mode

Guides users on how to access the system's programming mode.

To change the primary user code

User codes (2 to 4)

Setting the time

Testing

Automatic tests

Manual tests

Sensor test

Describes how to test individual sensors for correct operation and signal strength.

To perform a sensor test

Phone communication test

To perform a phone test

Testing central station communication

To test central station communication

Troubleshooting

Panel power

Addresses issues related to system power, low battery, and AC failures.

Access code

Discusses problems with remembering or managing access codes.

Arming

Covers troubleshooting for arming failures and protest conditions.

Bypassing

Sensor or touchpad low battery

Phone

Troubleshoots phone connection failures and verification issues.

Wireless touchpad

Wireless sensor zone or DTIM

Panel tamper

Trouble beeps

Entry and exit delay time

System options

Quick arm

Conditions, displays, and sounds