• If power to sensors is disconnected or inadequate.
• If environmental sensors are absent in areas where a specific condition can be
detected.
• If smoke does not reach a smoke sensor. For example, smoke sensors cannot
detect smoke in chimneys, walls, roofs, or smoke blocked by a closed door.
Sensors may not detect smoke on building levels different from their installed
location. Sensors may not detect when fires are caused by smoking in bed,
explosions, improper storage of flammables, overloaded electrical circuits, and
other hazardous conditions.
• If telephone lines are out of service. Telephone lines are also vulnerable to
compromise by any of several means.
Inadequate maintenance is the most common cause for alarm failure. Therefore, test
your system once a week to verify sensors, sirens, and phone communication are all
working correctly.
WARNING: Security system and devices cannot compensate you for life or property
loses. Although having an alarm system can make you eligible for reduced insurance
premiums, the system is no substitute for insurance.
If your system needs service
If you have any questions about your security system or if it ever needs servicing,
please contact your apartment manager or security dealer.
Company name ____________________________________________________
Address ___________________________________________________________
City ____________________________ State ________ Zip __________________
Phone number (_______) _____________________________________________
Contact name ______________________________________________________
Allegro Control Panel User Manual 35
To Next Page
Loading...
Need help?
General
