Need help?Do you have a question about the GE NetworX NX-6 and is the answer not in the manual?
Operating Power| operating power | 16.5 VAC 25, 40, or 50 VA Transformer |
|---|---|
| auxiliary power with 25 VA transformer | 12 VDC Regulated 500 mA |
| auxiliary power with 40 or 50 VA transformer | 12 VDC Regulated 1 AMP |
Loop Specifications| loop resistance for standard loop | 300 Ohms Maximum |
|---|---|
| loop resistance for 2-wire smokes | 30 Ohms Maximum |
| loop response | 500mS |
Operating Environment| operating temperature | 32 to 120 degrees F |
|---|
LED Keypad Specifications| led keypad current draw | 130 mA max. |
|---|---|
| led keypad dimensions width | 6.4" |
| led keypad dimensions height | 4.0" |
| led keypad dimensions depth | 1.1" |
NX-148E LCD Keypad Specifications| nx-148e lcd keypad current draw | 110 mA max. |
|---|---|
| nx-148e lcd keypad dimensions width | 6.4" |
| nx-148e lcd keypad dimensions height | 5.3" |
| nx-148e lcd keypad dimensions depth | 1.0" |
Enclosure and Shipping| metal enclosure dimension width | 11.25" |
|---|---|
| metal enclosure dimension height | 11.25" |
| metal enclosure dimension depth | 3.50" |
| shipping weight | 9 lbs. |
Procedure to change user codes for system access and authorization.
Procedure to enter programming mode using the "Go To Program Code".
Step-by-step process for entering data into programming locations.
Programs the first telephone number for the control panel's communication.
Enables features and communicator reports visible/accessible from the keypad.
Enables various system features and reporting options like siren and supervision.
Sets durations for system functions like battery test, delays, and times.
Configures special features like 6-digit codes, auto cancel, and walk-test mode.
Sets the event code for Contact ID or SIA reports for Zone Type 1.
Defines characteristics and features for Zone Type 1.
Lists minimum requirements for UL installations for various applications.
To Next Page