Need help?Do you have a question about the GE MDS 4710A and is the answer not in the manual?
General| Frequency Range | 902-928 MHz |
|---|---|
| Modulation | 4FSK |
| Channel Spacing | 12.5 kHz, 25 kHz |
| Operating Voltage | +10 to +30 VDC |
| Interface | RS-232 |
| Power Supply | 10-30 VDC |
| Sensitivity | -110 dBm @ 12.5 kHz |
| Operating Temperature | -40°C to +70°C |
Basic steps for installing the transceiver's antenna system and connecting to the radio.
Guidelines for connecting data equipment to the transceiver's interface connector using a DB-25 connector.
Instructions for applying DC power to the radio, emphasizing correct polarity.
Provides basic steps for installing the transceiver, covering mounting and connections.
Explains how to connect the transceiver to a power source, emphasizing polarity and system type.
Outlines recommendations for establishing a good safety ground to prevent damage.
Describes how to connect the transceiver's data interface to external DTE equipment.
Provides detailed explanations and usage of various transceiver commands.
Explains how to use event codes read via HHT to diagnose system difficulties.
Presents detailed technical specifications for the MDS 4710/9710 series transceivers.
To Next Page
