Need help?Do you have a question about the GE MDS iNET 900 and is the answer not in the manual?
Details the MDS iNET 900 transceiver, its capabilities, and models.
Explains how to connect to the radio, log in, and navigate its menu system.
Covers TCP/IP and Ethernet settings, including IP addressing, DHCP, and VLANs.
Explains settings for wireless operation, including RF output, data rates, and channels.
Details serial port configuration for data transfer using TCP, UDP, or PPP protocols.
Describes security features for accessing the radio and securing wireless communications.
Details using the embedded management system for diagnosing and resolving issues.
Provides tips for site selection, antenna systems, and interference reduction.
Lists detailed technical specifications including environmental, power, and regulatory compliance.
General| Frequency Range | 902-928 MHz |
|---|---|
| Data Rate | Up to 115.2 kbps |
| Operating Temperature | -30°C to +60°C |
| Power Supply | +10 to +30 VDC |
| Receiver Sensitivity | -110 dBm |
| Interface | RS-232 |
| Encryption | AES 128/256 bit |
| Weight | 0.5 lbs |
| Modulation | FHSS (Frequency Hopping Spread Spectrum) |
| Output Power | 1W (30 dBm) |
To Next Page
