M
Millenium™ RO System by GE Osmonics
14693e - 31 Mar 03 3 -
4
4 System Operation
4. Briefly turn on the inlet water valve switch. This will release pressure from the
feed water hose. When the pressure is released, turn the switch off.
NOTE:
If the Millenium™ RO is to be stored for more than 24 hours (RO not being
operated), the RO should be stored in an approved disinfectant or storage solution
(Not ‘RENALIN®’ or other type oxidizing products). Refer to the disinfection or
storage procedure in this manual.
5. Disconnect from the utilities and store the RO.
To Next Page
