GE Multilin EPM 7000 User Manual

MULTILIN EPM 7000 - POWER QUALITY METER – QUICK START GUIDE 1–1
Multilin™ EPM 7000
Power Quality Meter
Quick Start Guide
Using the I/O Option Cards
Digital Energy
Using the I/O Option Cards
1.1 Overview
The EPM 7000 meter offers extensive I/O expandability. Using the two universal Option
Card slots, the unit can be easily configured to accept new I/O Option cards even after
installation, without your needing to remove the meter. The EPM 7000 meter auto-detects
any installed Option cards. Up to two cards of any type outlined in this chapter can be used
per meter.
FIGURE 1–1: EPM 7000 Meter Back, Showing Option Card Slots and I/O Card
Option Card Slots
Option Card
GE Publication Code: 1601-0314-A2 (GEK-119660A)

GE Multilin EPM 7000 Specifications

General

Category	Power Meter
Manufacturer	GE Multilin
Model	EPM 7000
Frequency Range	45-65 Hz
Display	LCD
AC Voltage Inputs	3
AC Current Inputs	3
Communication Ports	RS-485, Ethernet (Optional)
Mounting	Panel mount
Current Input Range	1A or 5A AC
Accuracy	±0.2% of reading for voltage and current
Communication Protocols	Modbus, DNP3, IEC 61850
Digital Outputs	2
Analog Outputs	2
Power Measurement	Active Power, Reactive Power, Apparent Power

Summary

Overview of EPM 7000 I/O Option Cards

EPM 7000 I/O Expandability

The EPM 7000 meter offers extensive I/O expandability using two universal Option Card slots.

Installing EPM 7000 Option Cards

Safety Precautions for Option Card Installation

Crucial safety steps before installing Option Cards, including removing voltage and using ESD procedures.

Configuring EPM 7000 Option Cards

Resetting Unit Parameters After Hardware Modification

Reset all parameters in the unit after hardware modification for proper operation.

EPM 7000 Product Support Information

GE Digital Energy Contact Details

Contact information for product support, including GE Digital Energy's addresses, phone numbers, and email.