Customer ServiceTroubleshooting TipsOperating InstructionsSafety Information
23
Problem Possible Causes What To Do
Dishes don’t dry
Low inlet water • Make sure inlet water
temperature temperature is correct
(see page 11).
• Select
HI TEMP RINSE
and/or
HEATED DRY.
Rinse agent dispenser • Check the rinse agent
is empty dispenser.
Control panel
Door latch may not be • Call for service.
responded to inputs
properly seated
but dishwasher never
filled with water
Dishwasher won’t run
Fuse is blown, or the • Replace fuse or reset
circuit breaker tripped circuit breaker. Remove
any other appliances from
the circuit.
• Try resetting the
START/RESET
pad.
Steam
This is normal • Steam comes through
the vent by the door latch
during drying and when
water is being pumped out.
To Next Page
Loading...
Need help?
General
