GE OPAL01GEPKT User Manual

49-1000418 Rev. 6 9
Care and Cleaning
Cleaning the Bin and Tray
To clean the ice bin, remove the ice bin from the ice maker and clean with a soft cloth dampened with soapy water.
Rinsethoroughly.Drywithasoftcloth.Do not use solvents or chemicals.
The drip tray should be wiped dry. Water left in this area may leave deposits. To clean the drip tray, remove the tray
fromOpalanduseasoftclothdampenedwithmildsoapywatertogentlycleanthesurface.Drywithasoftcloth.Do
not use solvents or chemicals.
CARE AND CLEANING
Removal of Mineral Deposits
1.Fillthereservoirwithwhitevinegartothemaxfilllineandrunuptothreecleaningcycles.Or
purchase an Opal Cleaning Kit and follow instructions inside.
2.Ifusingvinegar,leavethevinegarintheunitfor18hoursandsetavinegar-soakedtowelon
theicechuteovernighttofurtherdissolveanymineralbuildup.Seefigure10.
3. Clean the sensors with vinegar and wipe clean with water. After draining the vinegar, run
threerinsecycles,usingfreshwaterforeachrinse.Seefigures11,12,and13toreference
location of the sensors. Appearance may vary based on model.
Figure10
Figure 11 Figure 12
Figure 13

GE OPAL01GEPKT Specifications

General

Brand	GE
Model	OPAL01GEPKT
Category	Ice Maker
Language	English