49-1000713 Rev. 0 17
USING THE FREEZER: Automatic Icemaker
Automatic Icemaker
A newly installed refrigerator may take 12 to 24 hours to
begin making ice.
Automatic Icemaker
The icemaker will produce seven cubes per cycle
approximately 100–130 cubes in a 24-hour period,
GHSHQGLQJRQIUHH]HUFRPSDUWPHQWWHPSHUDWXUHURRP
temperature, number of door openings and other use
conditions.
7KHLFHPDNHUZLOOILOOZLWKZDWHUZKHQLWFRROVWR)
(-10°C). A newly installed refrigerator may take 12 to 24
hours to begin making ice cubes.
If the refrigerator is operated before the water line
connection is made to the unit or if the water supply to
an operating refrigerator is turned off, make sure that
the icemaker is turned off. Once the water has been
connected to the refrigerator, the icemaker may be
turned on using the controls.
<RXPD\KHDUDEX]]LQJVRXQGHDFKWLPHWKHLFHPDNHU
fills with water.
Allow 1-2 days for the bucket to completly fill with ice.
Throw away the first few batches of ice to allow the
water line to clear.
Be sure nothing interferes with the sweep of the feeler
arm.
When the bin fills to the
level of the feeler arm,
the icemaker will stop
producing ice. It is normal
for several cubes to be
joined together.
If ice is not used
frequently, old ice cubes will become cloudy, taste stale
and shrink.
NOTE: In homes with lower-than-average water
pressure, you may hear the icemaker cycle multiple
times when making one batch of ice.
CAUTION
7RPLQLPL]HWKHULVNRISHUVRQDOLQMXU\
avoid contact with the moving parts of the ejector
mechanism, or with the heating element that releases
WKHFXEHV'RQRWSODFHILQJHUVRUKDQGVRQWKH
automatic ice making mechanism while the refrigerator is
plugged in.
To turn the icemaker ON/OFF, press the Ice Maker
button on the top control panel.
WARNING
Connect to potable water supply
only.
A cold water supply is required for automatic icemaker
operation. The water pressure must be between 40
and 120 psi (275-827 kilopascals).
To Next Page
Loading...
Need help?
General
