To Next PageTo Next PageWhy my GE Warming Drawer will not work?
If your GE Warming Drawer isn't working, there are a few potential causes: First, check your home's fuse box or circuit breaker and replace the fuse or reset the breaker if needed. Second, ensure the warming drawer is properly plugged into the outlet. Finally, make sure that the controls are properly set.
What to do if my GE PKD915 has excessive condensation?
If you notice excessive condensation in your GE Warming Drawer, here's what to check: * Remove any liquid that may be present in the drawer. * Ensure foods are covered with a lid or aluminum foil. * Reduce the temperature setting. * Adjust the Moisture Selector to the open vent setting to allow for venting.
What to do if my GE PKD915 food dries out?
If food is drying out in your GE Warming Drawer, it's likely due to moisture escaping. To prevent this, cover the food with a lid or aluminum foil.
How to fix GE PKD915 that does not slide smoothly?
If your GE Warming Drawer doesn't slide smoothly, the drawer may be overloaded or the load unbalanced. Try to redistribute the contents of the drawer.
Why is there no heat in PROOF setting on my GE PKD915 Warming Drawer?
If there's no heat in the PROOF setting on your GE Warming Drawer, the room temperature might be preventing the thermostat from activating. Try turning the knob to LOW and then back to PROOF.
Essential safety measures to follow during operation.
Guidance on operating the warming drawer for different uses.
Instructions for safely grounding the appliance.
Ensuring adequate support for the warming drawer installation.
Crucial step to prevent tipping hazards.
Final steps to physically install the drawer into cabinetry.
Guide to resolving common issues before seeking professional help.
Details of the product's limited warranty for US customers.
Details of the product's limited warranty for Canadian customers.
General| Brand | GE |
|---|---|
| Model | PKD915 |
| Category | Warming Drawer |
| Fuel Type | Electric |
| Power Source | Electric |
| Voltage | 120V |
| Wattage | 450W |
| Finish | Stainless Steel |
| Installation Type | Built-In |
| Depth | 24 in |
