GE Profile PFSS6PKXBSS

Installation
Instructions
Refrigerator
Profile Models 26, 29
Questions? Call 800.GE.CARES (800.432.2737) or visit our Website at: GEAppliances.com
In Canada, call 1.800.561.3344 or visit our Website at: www.GEAppliances.ca
BEFORE YOU BEGIN
Readthese instructions completely and carefully.
• IMPORTANT- Savetheseinstructionsforlocal
inspector's use.
• IMPORTANT-Observe allgoverningcodesand
ordinances.
• NotetoInstaller-Besuretoleavetheseinstructionswith
theConsumer.
• Note to Consumer- Keepthese instructionsfor future
reference.
• Skill level- Installationof this appliance requiresbasic
mechanicalskills.
• Completion time- Refrigerator Installation 20 minutes
Water Line Installation30 minutes
• Properinstallation isthe responsibilityof the installer.
• Product failuredue to improper installation is not covered
under the Warranty.
PREPARATION
MOVING THE REFRIGERATOR INDOORS
Ifthe refrigerator will not fit through o doorway,
the refrigerator door and freezer drawer can be removed.
• Toremove the refrigerator door,seethe Installing
the Rdrigerotor section.
• Toremove thefreezer drawer,see the Removing
the FreezerDrawer section.
WATER SUPPLYTO THE ICEMAKER AND DISPENSER
Ifthe refrigerator has an icemaker,it will have to be
connected to a coldwater line.AGEwater supply kit
(containingtubing, shutoff valve, fittings and instructions)
isavailableat extra cost from your dealer,by visiting
our Website at GEAppliunces.com (inCanada at
www.GEApplionces.ca)or from Partsand Accessories,
800.626.2002(inCanada1.800.661.1616).
TOOLS YOU MAY NEED
10mm SocketRatchet/Driver
AdjustableWrench
1/4" Outer Diameter
Compression Nut
and Ferrule (sleeve)
Phillips-HeadScrewdriver
3/32", 1/8" and4 mm
AllenWrenches
1/8" Drill Bit and
Electricor HandDrill
Flat-HeadScrewdriver
Tape Measure
Pencil
1/4" Nut Driver
Pliers
Level
24