GE Profile PTWN8050M0WW

About the washer features.
NOTE: Features may not be availableon all washer models.
MY CYCLE
Tosave a favorite cgcle, set the desired
settings for wash cgcle,soil level,spin speed
and wash temp settings and hold down the
MYCYCLEbutton for 3 seconds.A beep will
sound to indicate the cgcle has been saved.
Touse gour custom cgcle, pressthe
AtYCYCLEbutton before washing a load.
Tochange the saved cgcle, set the desired
settings and hold down the MYCYCLEbutton
for 3 seconds.
NOTE:When using MYCYCLEwash options
cannot be modified after the cyclehas been
started.
NOTE:Ifyou change wash options with
MYCYCLEbefore starting the cycle the
MYCYCLElight will turn off andyou will
beretumed to the basecycle.
Signal
Alerts gou that the cgcle is complete.
The clothes should be removed when the
beeper goes off so wrinkles don't set in.
PressSIGNAL to select low or high volume,
or to turn the beeper off.
The beeper will continue to sound everg
2 minutes (maximum of 4 times).
0IS°AK)
Lock
Youcan lock the controls to prevent ang
selectionsfrom being made. Or gou can lock
the controls after gou have started a cgcle.
Children cannot accidentally start the
washer by touching pads with this option
selected.
Tolock the washer, pressthe LOCKbutton. To
unlock the washer,press and hold the LOCK
button for 3 seconds.
When the lock function isenabled, the red
lock icon will appear in the upper displag.
Soak
Soak isan extra wash beforethe main wash.
Useit for heavilg soiled clothes or for clothes
with a care label that recommends soaking
beforewashing.
Besure to add high-efficiency detergent, or
the proper wash additive to the soak
dispenser.
Extra Rinse
NOTES:
, When selecting soak, it is recommended
to use powder detergent in the main wash
(detergent) compartment.
. The maximum soak time is 3 hours.
Use an extra rinse when additional rinsing is
desiredto remove excessdirt and detergent
from soiledloads.
6
f DELAY ]
0 L START J
f FABRIC ]
0 LSOFENERJ
Delay Start
Youcan delag the start of a wash cgcle
for up to 24 hours. Pressthe DELAYSTART
button to choose the number of hours gou
want to delag the start of the cgcle,then
press the STARTbutton. The machine will
count down and start automaticallg at the
correct time.
NOTE:Ifyou open the lid when the delay
iscounting down, the machine will enter the
pause state.Youmust closethe lid and press
STARTagain in order to restart the countdown.
Fabric Softener
SelectFABRICSOFTENERbutton to change
the final rinsetgpe from sprag rinse,to deep
rinse.Thisworks bestwhen usedwith liquid
fabric softener. Fabricsoftener is displaged
during the final rinse.
NOTES:
. For best performance with
COLORS/NORMAL,or WHITES/HEAVY
DUTYselect fabric softener or extra rinse.
. If extra rinse is selected instead of fabric
softener, fabric softener will be displayed
during the extra rinse cycle.