About CustomCoo[ M(onsomemodds}
Touch LED Dispenser Control
How it Works
The CustornCooF'feature is used to quickly
chill items, thaw items or hold the pan at a
specific temperature, This feature is a system of
dampers, a fan, a temperature thermistor and
a heater,
The pan istightly sealed to prevent temperature
fluctuations in the rest of the refrigerator,
The controls for this pan are located on the
dispenser with the temperature controls,
Express Thaw M
ExpressChi# "_
How to Use
O Empty the pan, Place the Chill/Thaw tray in
the pan, Place the items on the tray and
close the pan completely,
Touch LED Dispenser Control."
Select the Express Thaw "_,ExpressChilF
or Se/ectTemp "Mpad, The display and SET
light will come on, Tap the pad until the light
appears next to the desired setting,
Use the following chart to determine the
best setting to use,
ExpressChi//can be set to 15, 30 or 45
minutes, The default is 15 minutes,
To stop a feature before it is finished:
tap that feature's pad until no options are
selected and the display is off,
During ExpressThaw and ExpressChi//,the
display on the controls will count down the
time in the cycle (on some models),
After the ExpressThaw cycle is complete,
the pan will reset to the MEATsetting (32°F
[O°C])to help preserve thawed items until
they are used,
The displayed actual temperature of the
CustomCoo/pan may Vary slightly from
the SETtemperature based on usage and
operating environment,
NOTE."For food safety reason_ it is
recommended that foods be wrapped in plastic
wrap when using ExpressThaw, This will help
contain men,tjuices and improve thawing
performance,
To Next Page
Loading...
Need help?
General
