About ExpressChillY(on somemodels) GEAppliances.com
ExpressChil/
• SET
How it Works
The ExpressChilFfeature is a system of
dampers, a fan and a temperature thermistor,
The pan istightly sealed to prevent the pan's
temperature from causing temperature
fluctuations in the rest of the refrigerator,
The controls for this pan are located in the top
of the refrigerator or on the dispenser with the
temperature controls,
ExpressChill TM
How to Use
Empty the pan, Place the Chill tray in the
pan, Place the items on the tray and close
the pan completely,
Select the ExpressChi/I TMpad, On some
models, you can then select the chill time
(use chart to determine best setting), Other
models will only have one option (45
minutes), On models with multiple settings,
tap the pad until the light appears next to
the desired setting,
, To stop a feature before it isfinished, tap
that feature's pad until no options are
selected and the display is off,
, During ExpressChill,the display on the
controls will count down the time in the
cycle,
How to Remove and Replace the Drawer
To remove: 0 Lock all four swing locks by rotating them
Pull the drawer out to the stop position, to the lock position,
Rotate all four swing locks to the unlock
position,
Lift the front of the drawer up and out,
To replace:
Make sure all four swing locks are in the
unlock position,
Place the sides of the drawer into the
drawer supports, making sure the swing
locks fit on the drawer slots,
To Next Page
Loading...
Need help?
General
