Identifying Codes From Your Remote
If you need to find the three-digit code for
your TV, VCR, DBS System, Cable Box or
Audio System after your device is set-up,
use this procedure.
1. Press and hold CODE SEARCH until the
INDICATOR LIGHT
lights, then release
CODE SEARCH.
2. Press and release
the device button for
the code you are
retrieving. The INDI-
CATOR LIGHT will
blink once.
3. Press and release
CODE SEARCH. The
INDICATOR LIGHT
will turn off.
4. Starting with 0 on
the keypad, press the
number buttons in
order (0-9) until the
INDICATOR LIGHT
blinks.
5. The number which causes the INDICA-
TOR LIGHT to blink is the first digit of your
code.
6. Repeat Step 4 until you have retrieved
all three numbers in the code.
. . .
To Next Page
Loading...
