HOW TO USE THE
M~UTE/SECO~
T~ER
The Minute/Second Timer
Using a Holding Time
The Minute/Second Timer has 3 timing functions:
The Minute/Second Timer can also be used to
● It operates as a minute timer.
program a “holding time” between microwave
cooking functions. The time can range from 1 second
● It can be set to delay cooking.
to 99 minutes and 99 seconds. A holding or standing
● It can be used as a hold setting after defrosting.
time may be found in some of your own recipes or in
The Minute/Second Timer operates without
a cookbook.
microwave energy.
How to Time a 3-Minute Phone Call
Programming Delayed Cooking
Step 1: Touch MIN/SEC TIMER pad.
To delay cooking up to 99 minutes and 99 seconds,
Step 2: Touch number pad 3 and MINUTE pad (for
touch either TIME COOK I & II,
TEMP COOW
3 minutes and no seconds).
HOLD or AUTO ROAST and enter cook time,
Step 3: Touch START. Display shows time counting
temperature or code. Touch MIN/SEC TIMER
down. The timer signals when time is up.
and enter number of minutes to delay cooking.
When delaying
Temp
Coo~old
or Auto Roast
cooking, be sure probe is in food.
Touch START.
Timer will count down to O and cooking will begin.
How to Defrost, Hold and Time Cook
Let’s say you want to defrost a frozen casserole for
15
minutes, hold for 10 minutes and then Time Cook
for 25 minutes. Here’s how to do it:
Step 1: Take casserole from freezer and place in oven.
n
TIME
DEFROST
H
Step 2: Touch TIME
DEFROST pad.
Step 3: Touch pads 1,5
and MINUTE for 15 minutes
defrosting time. (Defrosting
is automatically set on power
level 3 but can be changed by
touching the POWER LEVEL
pad and the desired power
level.)
MIN/SEC
TIMER
Step 4: Set standing or hold
time by touching MIN/SEC
TIMER pad.
Step 5: Touch 1,0 and MINUTE to hold for
10 minutes.
TIME COOK
I &II
Step 6: Touch TIME
COOK I &11 pad.
Step 7: Touch 2, 5 and MINUTE for 25 minutes of
cooking time.
I
START
Step
8: Touch START. As
each function is automatically
performed, oven display shows
instructions entered and the
function. When time is up,
the oven signals and flashes
“End.”
10
To Next Page
Loading...
Need help?
General
